ALL about the WARP-FEED

[ES13Raven]

Any problems with the Warp and Advantage shelled paint?

[Havoc_online]

Do you have problems or are you asking if anyone else has had problems? I have never had problems with any different types of paint in a warp.

[pballguy17]

It seems with my warpfeed that the top right screw (plastic box fascing away) seems to have an effect on my senstivity. i took my warp apart to try to fix the senstivity, and i lost the nut on that side. and it was really senstive. i found teh nut today anre replaced it, and it seems less senstive, i shot it w/o nut and it was perfect, i have NOT shot it w/ the nut to c a actual change. do u think i'll have a preformance diffrance? and is this normal?

[ES13Raven]

Originally posted by Havoc_online
Do you have problems or are you asking if anyone else has had problems? I have never had problems with any different types of paint in a warp.

I just got mine, and haven't had a chance to put any paint through it.

I read that in another post somewhere, about warp and advantage shell paint. RP is all I shoot, so I was wondering if it was a common thing but I guess not.

[ES13Raven]

12v Mod question......

I found out that the used Warp I bought was modded for 2 9vs in parallel for a bigger cell. So I am changing it to the 12v mod.

I have been reading old posts about the 12v mod, and how sometimes it is necessary to use a capacitor to "filter out noise" and "keep it from constantly spinning."

Will I need to add a capacitor to this setup, or only if I run into problems? If so, what capacitor(s) will I need? (I read that you need 2 caps, and also read that you can use just 1 on the output of the 12 regulator)

Also, will using a capacitor keep a "pool" of regulated juice to draw from? (more power for bursts)

I will be running this using Intelliframe on my Racegun.

[Havoc_online]

I've never found the problem where the warp wont stop spinning but it happens to some ppl(you could use a 100uf cap). I did however measure the output on one set-up I did(with no cap) and it was about 16v, the warp worked fine(awesome actually) .Personally, I wouldnt install one unless I got a picky warp.

[Doobie]

BTW...for those interested in a 12v mod and are too lazy to do it themselves, (like ME!) the PTP 12v that is linked at the top of the thread works very well and is well put together. Last time I checked they were on sale for about $12! It cost me $16 w/ shipping. For a guy who does not have a lot of free time, it was well worth it!

[JT2002]

please look at my thread. i really want to use my warp!!

http://www.automags.org/forums/showthread.php?s=&postid=554687#post554687

[pr240sx]

How do I solve the ball stack problem?

In my situation, my paintballs are just like the "wrong" diagram.

How do I solve this?

[Havoc_online]

make sure your plug(parabolic) is in the correct position and your hose is not being pinched.

[qbano65]

Hey Havoc, is there any real advantage to getting the pro team products warp kit over the AGD for my minimag??? What does the ptp one have that the AGD one doesn't? I went on their site but didn't really get much info out of it.

Carlos

[Havoc_online]

I'd pick the AGD one anyday. The PTP is basically a different mounting system that offers a different angle but also has the vib sensor on the mount(I've personally seen a lot of problems with the sensor on the outside.)

[qbano65]

Thanks Havoc, I'll remember that.

Carlos

[pr240sx]

Pinched

Where?
Inside the 90 adapter?
Right now the feed tube makes almost a 90 degree turn just to enter the adapter.
Could the problem be there?

What could happen if the stack is wrong?

[Havoc_online]

do you have a pic of your set-up?