"Classic Valve and ULT trigger don't mix"... my a**(video)

[Plazmic]

I probably can. PM me.

[Plazmic]

No problem. We're going to find a way to shrink the file a bit, though. :)

[Bad_Dog]

who wouldnt want to host a 45MB file:) ???


just kidding

[Bad_Dog]

....FIILM....


you'll see....

[danheneise]

so would you guys, that have a ult'ed classic, suggest getting a ult? btw what's the max amount of shims you can have in before it sticks out of the valve too much?i have 3 extra L10 shims still and the L10 worked perfectly the other weekend, first time experiencing NO CHOPS all day , i'm just debating whether i should buy one of these kits or procede with converting my black dragun to a closed bolt blow back

[Bad_Dog]

well, what I can tell you is that if I didnt have the ULT in my classic; I probably would have bought an x-valve... and now I see no need for it:)

If someone were to ask me on the street if they should get the ULT for thier classic valve, I'd say yes

but to be on the safe side, order an extra lvl10 shim or too..

[the electrician]

I think it works great.
with a little bit of getting used to, I imagine I could get more than 9 bps. these other guys are getting 11 bps. that's great for a mechanical gun and about all your gonna get with a revvy. the trigger pull is much, much lighter. I recommend it, if you're happy getting that kinda of performance(11 bps) out of it.

I will say, make sure your sear is not too awful worn. my friends old classic has been shot so many times, that the sear was worn to the point that it didn't want to return properly. so just check it, if you know it's old.

[silentdeath55]

I agree with the other guys. The ULT is a great upgrade, but only if you take the time to tune it properly.

Like Bad_Dog said, if someone were to ask me on the street I'd have to say yes. And with a price of less than $50, it's pretty cheap too.

[AGDlover]

it says i can't view it

[silentdeath55]

It works fine for me. Try right clicking and saving the target, that may work. otherwise idk.

[warfrik]

Ok, here is my thing. I have a classic valve / lvl 10. I just ordered a booyaah frame but I haven't install it. Would a ult be an ideal way to go with a booyaah frame?

[Plazmic]

Is that a Booyah electronic? In that case, no, it's not necessary.

[warfrik]

Yes it it electronic but the selenoid s not powerful(using one 9.6V battery) enough to push the sear. I had to connect two 9v battery in series for the frame to work because I think that the stock on/off of the classic valve is too stiff, that's why I was think of getting a ult but I'm not sure if its a good idea. Any suggestions?

[Plazmic]

WEll, in that case it might be just what you need. I'm afraid I can't give you a definite on that, though.

[Cool fool!]

that iz cool!