finally finished my homemade e-mag conversion...

[noahyay]

id buy a mag instead of a shocker
i took the liberties of doing some research for you

the mq vvalve wont be out for a while for the mag and you would just end up haveing to sell the x valve and the lvl 10 and buy a regulator

i dont know what your style is but heres what i would do

Select an X-Valve : Black
Select a Mainbody : ULE CF Black
Select a Gripframe : Single Trigger Carbon Fiber Frame Assy
Select a Barrel : ULE Barrel (ULE/Slug MB)
Trigger/Valve/On/Off Type : ULE Trigger Pull Kit/Installed
Detent (Kila-ULE bodies ONLY) : Stock Detent (no charge)
asa
$440

dont get a double trigger frame because ull end up getting a devil mag and its hard to walk a ult mag really anyway. its possible but hard, and its unrealistic in a game

then when its time to upgrade buy a devilmag kit for 550

you will have an electronic tourney legal mag that can shoot 20 bps or more if you want to set it to full auto. it will be light and more reliable than any electronic gun on the market

or just buy a devil mag right now if ur planning on the 900 shocker anyway

the problem with this is upgrade is that tourneys no longer allow gun modifications

[trains are bad]

the problem with this is upgrade is that tourneys no longer allow gun modifications

huh? hate to hijack but what tourneys are you talking about?

[ilovemags2]

huh? hate to hijack but what tourneys are you talking about?

Say what! That would pretty much eliminate any marker I would use, face it stock blows!

[noahyay]

you can use aftermarket parts or professional equiptment

but 'custom' things like bolting a couple parts to your gun so it shoots twice as fast like this thing wont be legal in any tournament

[Joni]

Huh? There is basically no difference between doing this, and bolting on a electro frame on a cocker.

[jamescell]

Huh? There is basically no difference between doing this, and bolting on a electro frame on a cocker.

you make after market elcetro mag frames, RIGHT?

[noahyay]

the only aftermarketelectro mag frame i know of is the devil mag and thats $550 w/ eyes and lvl7

i dont make the rules -and yes the rules suck

i guess they dont want the paintball geeks beating the other ppl cause they know more about electronics and less about shooting lanes

[undescriptive]

I was assuming that providing that the marker conforms to the "1 shot 1 pull" rules and is firing @ 300ft/s it's all good....

many gats I see @ tourneys DON'T conform to these rules (especially some of the angels anf Timmys that I have seen!) and STILL are allowed onto the field.....

this is not even looking @ the ramping borads etc....

[noahyay]

well less uptight places might not mind. if you check wil the field owners they'll probly say yes if its a amatuer tourney or such

[Joni]

you make after market elcetro mag frames, RIGHT?

I have made A frame for myself, I don't see how that matters?

Let's get on topic on this thread. Maybe start a new thread if there is a need of more discussion

[UTDragun]

if u converted your mag to electronic, would those pnuematic mods like hair and ptp's have any improvement, or are they just two different ways of pulling the trigger?

also, whats the best soleniod type/kind/part #?

[UTDragun]

if u converted your mag to electronic, would those pnuematic mods like hair and ptp's have any improvement, or are they just two different ways of pulling the trigger?

also, whats the best soleniod type/kind/part #?

bump

[ben-afficial]

interesting......kinda interesting

[UTDragun]

if u converted your mag to electronic, would those pnuematic mods like hair and ptp's have any improvement, or are they just two different ways of pulling the trigger?

also, whats the best soleniod type/kind/part #?

up

[the electrician]

no they would not really help each other.

you can use what ever solenoid, or solenoid valve you want.

I used the equivalent of a pnemadyne S10MM-30-6-2. it's a 6 volt model.
but the 12 volt model will work.