Some People Never Learn

[Jebus]

Nope, not you. That isn't even on straight lol. Opened a claim - good thing, 45 days expire tomorrow hehe.

Thanks!

[rschoi_75]

im not saying you to anybody in particular, but if you got burned on more than one pre-order then if something goes wrong you should get partial blame, cause once again nobody forced you to be the #1 slot on the next pre-order?

why not cut PTP some slack, they made a mistake on 2 of the recent projects they were involved with, but from what I've seen and heard from PTP, they have tried to make it right and/or did make it right for any issues i had which werent many at all...so as a customer m happy with PTP.

I'm not sure who you're talking too either, but I don't think any buyer should bear even partial blame for something like this. I wasn't on the MM09 pre-order. This is a first for me too.

To me, a "pre-order" does not mean that a buyer should bear any risk or blame. We pay for a predefined product/service just like any other retail transaction. This is not a joint venture where we share risk (and potential profits). This is a retail purchase, and as such the seller is to be held liable for any problems associated with said product/service. I think it's ridiculous to blame the customer on this one.

Also, this whole problem could have been avoided if they had a simple QC process. Honestly, this was an amateurish move; easily caught by anyone who takes pride in their work.

[need4reebs]

I'm not sure who you're talking too either, but I don't think any buyer should bear even partial blame for something like this. I wasn't on the MM09 pre-order. This is a first for me too.

To me, a "pre-order" does not mean that a buyer should bear any risk or blame. We pay for a predefined product/service just like any other retail transaction. This is not a joint venture where we share risk (and potential profits). This is a retail purchase, and as such the seller is to be held liable for any problems associated with said product/service. I think it's ridiculous to blame the customer on this one.

Also, this whole problem could have been avoided if they had a simple QC process. Honestly, this was an amateurish move; easily caught by anyone who takes pride in their work.

im not talking to anyone specific. the original post was "Some People Never Learn"....so i guess i would be talking to those people that didnt learn...haha?

not saying the buyer should get any blame for any issues with the product, im just saying if you got burned once on a pre-order its your fault if you put your self in a position to get burned again? i know it sucks waiting around for parts or markers, but if the product hasnt been made yet or been tested or have any reviews, there is no way i would send 400-500 bucks just so i could be one of the first people to have one? i would have a hard time sending any amount of money to someone for a product that isnt made yet after all the pre-orders ive seen where someone got burned!!!

thats what i meant about the buyer being partially at fault or to blame? hope that makes better sense?

[OPBN]

not saying the buyer should get any blame for any issues with the product, im just saying if you got burned once on a pre-order its your fault if you put your self in a position to get burned again? i know it sucks waiting around for parts or markers, but if the product hasnt been made yet or been tested or have any reviews, there is no way i would send 400-500 bucks just so i could be one of the first people to have one? i would have a hard time sending any amount of money to someone for a product that isnt made yet after all the pre-orders ive seen where someone got burned!!!

Have to somewhat agree with this. After the multiple fubar preorders that have occurred here, I am not sure how anyone in their right mind would do a preorder. To cut some of the Cocker guys some slack though, maybe hey have had better luck with preorders than we have here.

I lucked out on the MM2K9 preorder as I came in late, bought someone's spot and got my body etc in about 2 months. And it worked!

[blackdeath1k]

Have to somewhat agree with this. After the multiple fubar preorders that have occurred here, I am not sure how anyone in their right mind would do a preorder. To cut some of the Cocker guys some slack though, maybe hey have had better luck with preorders than we have here.

I've had great luck with the few pre orders that I have done. They were not with a company that has had a few big flubbed pre orders in recent past though. I bet a lot of the guys didn't know about the mag issue. For the most part though I wait for the product to be really tested before purchasing.

[need4reebs]

Have to somewhat agree with this. After the multiple fubar preorders that have occurred here, I am not sure how anyone in their right mind would do a preorder. To cut some of the Cocker guys some slack though, maybe hey have had better luck with preorders than we have here.

I lucked out on the MM2K9 preorder as I came in late, bought someone's spot and got my body etc in about 2 months. And it worked!

yeah man i lucked out with my MM2K9 as well...in fact it was the first nice mag i ever bought and i didnt have a clue any of the back round of the markers, ii just knew it looked great as well as shot great so i bought it?

a pre-order is a pre-order...whether its here or there, mag or auto cocker....so if being the #1 person to have the newest product out, means that much to someone that they send out all kinds of money for a figment of someone elses imagination, id say they are the #1 person to blame, or i should say the number #1 person they should be pissed at, for putting them self in that situation in the first place!!!

[GoatBoy]

regardless of who is right or who is wrong, or who did this or who didnt do that...nobody forced the people who sent their money for a product that wasnt built yet....after the first ever pre-order that went bad here on AO people still paid for a slot on the next pre-order? how many pre-orders have their been that have gone wrong? more than a few, right? alot of the pre-order issues could have been stopped after the first one went bad if nobody bought a spot on the second pre-order? think about this if your so smart, and you never make a mistake, why are you pissed off about another pre-order gone bad that you lost money on when you got burned on the last pre-order??

im not saying you to anybody in particular, but if you got burned on more than one pre-order then if something goes wrong you should get partial blame, cause once again nobody forced you to be the #1 slot on the next pre-order?

why not cut PTP some slack, they made a mistake on 2 of the recent projects they were involved with, but from what I've seen and heard from PTP, they have tried to make it right and/or did make it right for any issues i had which werent many at all...so as a customer m happy with PTP.

thats just my 2 cents about all this stuff

True, lots of custom and pre-order stuff goes bad all the time. It happens, and I can understand.

But I think the backlash is directly proportional to the fanboy-ism that we have to listen to about said company.

It's kind of like with Apple -- I think people probably wouldn't hate Apple quite so much if the fanboys would just learn to shut the Hell up.

Who in their right mind would join in on another PTP preorder? Well, possibly everyone who read all the crap about how awesome they are. And believed it.

So anyways, I think it's just another 'lesson learned' for everybody.

[need4reebs]

True, lots of custom and pre-order stuff goes bad all the time. It happens, and I can understand.

But I think the backlash is directly proportional to the fanboy-ism that we have to listen to about said company.

It's kind of like with Apple -- I think people probably wouldn't hate Apple quite so much if the fanboys would just learn to shut the Hell up.

Who in their right mind would join in on another PTP preorder? Well, possibly everyone who read all the crap about how awesome they are. And believed it.

So anyways, I think it's just another 'lesson learned' for everybody.

Damn GoatBoy that was Poetry...haha

i actually agree 100% tho!!

PTP posted that the issues would be fixed, so yeah while its a bummer to have to wait...and im not a very big fan of waiting....thats the risk you take with custom work but more so pre-orders!

[Frizzle Fry]

Interesting how mature the response has been on Custom Cockers, compared to... this.

And Goatboy, "shutting up" can be a mutual thing.

[cockerpunk]

beginning to wonder if i am the only one who ever got good work out of rrfireblade .....

both of these entire problems can be summed up with simply caring enough to fix it. they saw the problem, they tried to fix it, it didn't work, they made the decision to ship anyway. that's not a lack of QC, its a lack of caring.

[OPBN]

both of these entire problems can be summed up with simply caring enough to fix it. they saw the problem, they tried to fix it, it didn't work, they made the decision to ship anyway. that's not a lack of QC, its a lack of caring.

One of the few times I agree with you. Looking at the pics of Jebus' body, holy crap! Who would have shipped something with flaws like that? I don't know that there is anything that can be said to justify it short of they hired a blind monkey to handle their QC.

[Bunny]

Jebus: Wow, that is really bad. I can't believe PTP would ship it like that to you.

[Jebus]

Spoke with Tracy, they are going to make me another one and swap them on their dime....a lot happier than earlier lol

[need4reebs]

Spoke with Tracy, they are going to make me another one and swap them on their dime....a lot happier than earlier lol

wasnt that what she posted in the thread that the bodies would be redone and swapped out? before all the ranting even started? they didnt really get a chance to figure out what the next move was, knowing that some customers would be upset with the bodies shipped the way they were shipped or redoing the bodies and making the customers wait??

so now your back to being a PTP customer? sorry this happened to ya but throwing a company under tha bus didnt have to happen did it? or bringing the auto cocker body drama over to the automag forum didnt have to happen did it?

what a bummer man???

[blackdeath1k]

Crap happens with first run stuff. So the issue with the gun body's is no big deal to me. From the looks of it they will be sweet when it is all finished. PTP tries to keep a happy customer. But the shipping department needs major help.