One Legged T-Rex (OLTR)

[yellowmitten]

I'll take one

[luke]

I pulled up my Intelli file, it looks like it won't be a problem at all, but it will require machining and a mounting tab/ set screws
At a glance, the PTP single trigger Benchmark frame should work, but needs machining.
I know for certain is the Y frame will not work.
Cougars frame should work with machining.
I don't know about the M90, but I would say the chances are better than good.

[cougar20th]

Im gonna do more checking tomorrow to check wall thickness on a m86 if its been modded.

[luke]

Im gonna do more checking tomorrow to check wall thickness on a m86 if its been modded.

Grip thickness (If this helps)
My mini vert is at .730" raw
Intelli anodized is .740"
Intelli chrome plated is .750"

[luke]

Did AGD ever release data on the stroke length of the sear leg for the classic valves or RTP on/off valves? Perhaps the degrees of rotation around the sear pin from the start point, sear locked on the bolt. (Strike face)
The ULT info won't help because it will vary depending on the number of shims.
I've reverse engineered it pretty close but having the factory number would set me at ease with the design. I have to find an extra (minimum) 1/16" in the valve system to make changes and it's pretty tight, actually that's a huge amount, lol.

[bbotts77]

I might be up for one, since Forest still has the one I got from Zap.

[luke]

Small update, the V10 design is done, I'm pleased with the out come. I was able to find the 0.060" needed to make the necessary changes. The areas that would have affected the performance that I had in V9.1 was maintained, so I expect no change there. I did take the valve pin stroke down to .02" which is about 1/3 the stroke of a micro switch. I'll start on the reprograming for machining later today, perhaps get the parts machined tomorrow...

[goin5150]

Definitely interested in at least one

[BigEvil]

So what was the outcome regarding these things working in a standard AGD frame?

[luke]

So what was the outcome regarding these things working in a standard AGD frame?

The Intelli is completely doable (As expected) but must be machined, I'll also design a mounting tab for an easy install.
M86 is completely doable, but must be machined, designing a mounting tab will be super easy.
No idea who has the CAD's on the M90 to have it checked, but I think it will work with machining too.

[Dayspring]

And no good for Y-Frame right?

[BigEvil]

The Intelli is completely doable (As expected) but must be machined, I'll also design a mounting tab for an easy install.
M86 is completely doable, but must be machined, designing a mounting tab will be super easy.
No idea who has the CAD's on the M90 to have it checked, but I think it will work with machining too.

Same as the M86 and I frame

Once they are altered, will they still be usable as mechs?

[luke]

Y frame is out, sorry.

If you look at the milling on the Mini Vert frame, them compare that to the Y grip, you can see why it's inpossible. The machining must match my frame to work.


Here's a side view of the problem. It must have at least as much material as the Intelli to machine the internal cavity to install the cheater.

[luke]

Once they are altered, will they still be usable as mechs?

Absolutely and will not affect the current capabilities of the current design, meaning you could still build a sleeper with a MPA3 and MSV2.

If you did a new run of frames you could include this machining AND the mounting tab and keep everything else the same.

[dodge3500]

I'm in for 1 possibly 2.