LcMP90 - P90 LPR - VASA

[luke]

Coming Soon!
No pre orders.
Uses standard Intelli style triggers.
Trigger pin is a standard dowel pin held in with set screws.
AGD style safety. Everything is identical except it's 1/8" longer. (1/16" per end)
A standard safety will work in a pinch but not ideal.


The LcMP90 is a mechanical frame and comes standard with mounts for the T-Rex and the new P90 LPR.

LcMP90 RHS.JPG

LcMP90 LHS.JPG

The final version has a little more ULE milling on the top side than what is shown here.
LcMP90 Top.JPG

The stripped down frame as shown below weighs 4 ounces.
LcMP90 No Grips.JPG

Size comparison using grip panels.
The MV frame is about an 1/8" taller than the Intelli frame.
The LcMP90 is about an 1/8" taller than the Emag frame.
LcMP90 Size Comparison.JPG

ULE milling
LcMP90 Panel ULE.JPG


Video Clip T-Rex, P90 LPR, LcMP90, Retro Valve Test @ 24 CPS

http://videos.weebly.com/uploads/3/5/4/5/35459873/knee_mill_p90_t_rex_test_1_111.mp4

A few pictures of the test setup
Knee mill test Ninja reg 2.JPG

Knee mill test picture 1.JPG

Video Clip LPR Testing

http://videos.weebly.com/uploads/3/5/4/5/35459873/p90_lpr_test_video_941.mp4

A few pictures of the test setup
P90 LPR Test Setup 2.JPG

P90 LPR Test Setup 1.JPG

[luke]

I'm currently working on the machining programs for these two parts so the prototypes are currently in the works.
I'm posting these with the frame because the plan is to release everything at the same time.

This is the CAD file for the LcMP90 and the P90 LPR
The LP air fitting has a full 'no tool' 360* position adjustment. This is for ease of installation and positioning of the LP hose and fitting.
Internal LPR.JPG

The LPR is designed with o-ring seals for the LP air fitting and the 1/8-27 brass fitting mount, NO tape or thread sealer is necessary.
The height of the ASA is the same as the AGD Automag ASA minus the wings, but uses the same screw and spacing as the RTP ASA.
VASA RHS.jpg
VASA LHS.JPG

Click on pictures for larger views.

[mobsterboy]

WTF Luke. My money is supposed to go to helping other separate themselves from their Deadly Wind bodies and rails... Not buying more awesome frames with plans to build a pneumag

[awo702]

Awesome. Been waiting for this. \m/,


Sent from my iPhone using Tapatalk

[going_home]

Nice !

[luke]

Nice !

I believe this is what you ask for in the LcE90 frame.

[captian pinky]

are you going to be modding on/offs to go with the sleeper lpr?

[luke]

are you going to be modding on/offs to go with the sleeper lpr?

On/Offs as in On/Off ASA's?

Yes, that will be something I'll have to do initially. I've always opted out of doing the sleeper mods because other members here were doing them. However with the release of these parts I'll need to, but like I said 'initially'. I say that because my next project after these three will be a new ASA designed specifically for this, actually there will likely be two versions/configurations released at the same time. At least those are my loose plans at this stage, nothing is designed just some specific ideas and direction.

[UltraMag527]

Could this be used for the R/T Classic?

[luke]

Could this be used for the R/T Classic?

Kind of but not really because I would have to move the T-Rex forward and the amount it takes to make that adjustment isn't doable with the standard T-Rex mounting location. It would have to be made specifically for the RT and with the low production numbers has always made it difficult to support the product.

[luke]

Could this be used for the R/T Classic?

If you dont want to go with the T-REX the frame can be drilled to use on the RT.

[Gabehcoud]

Great, just great. I was supposed to be saving money for your new z-frame but now I don't know which one I want.... first that is

[Apathetic_Chaos]

I want one

Sent from my SAMSUNG-SM-G930A using Tapatalk

[luke]

I'm planning on getting started on these after Christmas.

[luke]

I lengthened the VASA to make it more symmetrical

VASA Final Longer.JPG

VASA Final Longer 2.JPG