Possible Resolution to the 3.2 Problem.

[Potatoboy]

If anyone is looking for a blue x just like dirty's, PM me.

[hitech]

I have a question for those of you who swapped the wires on the solenoid. Does it now not "bounce" at a SHBF of zero (0)? If it still does, what do you need to set it at to eliminate "bounce"? Mine will go fullauto at zero, but calms down considerably with a SHBF of 8. I'm trying to decide if I need to "fix" mine. Thanks in advance.

[cphilip]

A few noted an improvement in the problem ones with less BPS settings. Not certain anyone noticed much affect at varying Debounce settings.

[Blennidae]

Hitech: What version of the software do you have? I have 3.2 and the lowest setting for the SHBF mine has is 4. Just curious.

[hitech]

I have 3.2. However, I'm not at home, but I seem to remember being able to set it to zero. I'm not sure though. I'll have to check. I do know that I was able to get it to go fullauto with no air at the lowest setting. I'll check tonight.

[JT2002]

why potatoboy u got 1 for sale?

[Potatoboy]

did i NOT say pm?

[JT2002]

ok then pm me

[Tunaman]

Originally posted by TheBigRaguPB4L
My emag(v1.37) goes full auto without air. I never had any problem with it with air though so i never worried aboot it. Just in case anyone's interested.

Please switch the solenoid wires and see if it still does it. Another nail in the coffin would be great.

[cphilip]

Well I never got to do this one here today. I spent the whole day out in the Freezing rain dealing with a dead Forklift that decided to go down half way through loading a Truck. Truck can't roll cause manifest is inclusive of all items. Half items on half off... no lift gate... stuck!!!!!Finaly got it going and finished loading around dark. I am cold, wet and pissed. Currenly sporting warm dry socks and a Glass of Port. This job is starting to interfer with my fun! Anyway I try again tomorrow.

Yea, I would love to see what some of these other ones do with a switched wires.

Now that being said how many of you kids are gonna think to put a plug in line (instead of hard soldered) and try and be able to switch to FA at a whim with this dangerous new info you got? DON"T YOU DARE!!!!!!

[felony]

AGD..

Just wondering if you had done the tests on my marker..

Should have arrived at your place this morning, the 4th.

LMK if it is fixed and what not

dan

[FragTek]

Heading to the work bench right now... I will report back in a little bith with the status and hopefully a big "THANK YOU TOM U ARE GOD!"

Stay tuned!

[FragTek]

First question, how does the solenoid come apart so that I can access were the wires are soldered to it? Does the top bracket screw off alowing the solenoid to come apart? Or, is it possible to cut the wires and and cross them over w/o even having to bust into the solly? LMK, thx!!!

[ChucktheMAGician]

Originally posted by cphilip
Now that being said how many of you kids are gonna think to put a plug in line (instead of hard soldered) and try and be able to switch to FA at a whim with this dangerous new info you got? DON"T YOU DARE!!!!!!

Good idea!

[cphilip]

Originally posted by felony
AGD..

Just wondering if you had done the tests on my marker..

Should have arrived at your place this morning, the 4th.

LMK if it is fixed and what not

dan

Everyone in the back is gone from AGD for events. Roman is gone too. They be back Monday. Tom tuesday. So no its not been touched if it got there today. Monday maybe.