Electro-Pneumatic Kit VIDEO!!!!

[Sudz]

someone wanna goldwave it just for [poops] and giggles?

Great kits, if i didn't need to save up for University I'd be all over it!

[robnix]

Typing through coffee, you owe me a new monitor.

[�?�� �m���]

[G Squat]

gotta have one of these p8nt... great job. Keep us posted on when its ready.

[RRfireblade]

someone wanna goldwave it just for [poops] and giggles?

Great kits, if i didn't need to save up for University I'd be all over it!

Shocker Vid2 = 16-17

MagKit Vid2 = ~22 (no full second runs)

RT Vid3 = 17-18

MagKit Vid2 = 22-23

[ShadowNife]

Fo those of you with E-Mags,... dont think we have forgot about you!

BigEvil came up with an idea for converting an E-Mag over to this kit and using the existing frame. I will be speaking with him at Tunaball about it, so when the kits are done,.... thats next on the list!

~ P8nt

YES! thats what i like to hear! Just curious, will it be a drop in kit or will we have to have some permanent mods done to the frame that will make it impossible to revert back to an e-mag?

Probably means we'll need a new sear too haha

[warbeak2099]

For jay's frames will one have to drill and tap mounting holes for anything? Or is this really 100% drop in.

[Sudz]

Shocker Vid2 = 16-17

MagKit Vid2 = ~22 (no full second runs)

RT Vid3 = 17-18

MagKit Vid2 = 22-23

Wow, impressive! Thanks a lot RRFireblade!

[Mongoose]

WOW....
let me know when and where to pick this up X2

[SummaryJudgement]

Frickin SWEET!

I'd love to have a setup where the LP was mounting in the forgrip space and the hose run through the rail. That looks super hot! Amagine how much MORE confused the kids at the field if you show up with an EP kit in one of those frames

"What kind of....Angel, uh.........shocker, um......what?"

[nevtangle]

Nice work!!! Can't wait to see a vid of it shooting paint...

[p8ntbal4me]

Hey Jai after watching the video again I have a question for you...

What exactly is a 'stawk' classic RT body?

lol,.... -1 EP Kit for BigEvil @ Tunaball!


R U still laughing?

[p8ntbal4me]

Shocker Vid2 = 16-17

MagKit Vid2 = ~22 (no full second runs)

RT Vid3 = 17-18

MagKit Vid2 = 22-23

RR,.... do u want a longer video?

I GW some runs with a Mic hooked up to a laptop for my testing.

Since you took the time,.. what do you need to get a much better reading??

I plan to doa good one at Tunaball,.. but maybe I can squeeze in another one later on this week.

Let me know.

[nevtangle]

RR,.... do u want a longer video?

I GW some runs with a Mic hooked up to a laptop for my testing.

Since you took the time,.. what do you need to get a much better reading??

I plan to doa good one at Tunaball,.. but maybe I can squeeze in another one later on this week.

Let me know.

PM'd you I'd like to look at the ones you recorded with a mic on the lappy.

[p8ntbal4me]

YES! thats what i like to hear! Just curious, will it be a drop in kit or will we have to have some permanent mods done to the frame that will make it impossible to revert back to an e-mag?

Probably means we'll need a new sear too haha

Lots of ways we are going to try.

I have to work with BE on this one because he had some EP ideas,.. and I had some straight Electro ideas that can be worked out to eliminate the big noid. (Yes,.. u read correctly. No more 18volt battery and big noid)

Keep in mind that this is all on paper. Lots of guys have tried this and have found no real simple way to do it.

On top of ALL that,... Tom Kaye designed the E-Mag the way he did for alot of reasons. I have to figure him out as I go in order to not kill an already working design.

For 99% of us out there,.. the E-Mag with Xmod on it is the end of all ends! For the guys that want to try a little bit different route,... Big Evil has some ideas. So I will be working with him to see what we can do for you.

I try to start with no machining. Thats the target goal. From there the parts get a bit larger but leave open doors to go to.

I have just done some SIMPLE measuring,.. and I came up with 2 aprt changes for both electronic as well as EP conversion for the existing frame. This means that with a little part moving,... we may beable to build new internals without milling the frames.
Again,.... this is all simple mock-up that anyone will look at to see if it can be done.
I think it can,.. so Im working on the sales of these kits to fund a future product like the new internals for an E-Mag.

I want to come back from Tunaball, and sit down and see what we can do for making these things avalible as soon as possible. I really DONT want to rush into it too much as I have alot of work to be done (testing) on other parts,... but if I feel good about the kits and the parts,.... I will do a run of at least 100 to start things off right.

More to come after Tunaball! If you can make it,... BE THERE!!!!!