2008 Automag . . .

[Lee]

-cocker threaded
-break beam eyes since the public never "got" the L10
-one piece body to give kiddies less to fool with
-electro broadens market appeal. i think pneumatic only is a niche market and the playing public at large isn't ready for it
-multiple firing modes, shot per second counter etc
-lower the operating pressure to also broaden market appeal. shots per tank turn people on
-will have to lose the "automag" name and dampen associations with mags in general
-feednecks threaded in most widely availble thread pattern (example: angel/impulse/bushmaster)
-dual detents smaller (at least in perception) than ule body detents with threading to match feedneck style
-dump warp feed compatability. the broader market does not use them. they are niche only
-no modular breech
-trigger with multiple points of adjustment
-runs on a 9v

[pump]

what im trying for my mag is a air line that is ran through the grip frame, i would like to see that for a new mag if it were to be brought out

[cyrus-the-virus]

-lower the operating pressure to also broaden market appeal. shots per tank turn people on

The current mag will operate down to about 450 PSI and still shoot at 280. People love shockers and ions even they are some of the worst gas hogs I've ever seen.

-will have to lose the "automag" name and dampen associations with mags in general

...

This thread makes me laugh, honestly reading some of the reply's in this thread made me fall on the floor. Everybody want's a DM7 corssed with a mini rather than a mag.

[Pneumagger]

Can it be small enough so that my whole setup looks like a hopper and tank joined together with a barrel and trigger just sticking around? That would weigh like 8oz!

[ProblemKinder]

The current mag will operate down to about 450 PSI and still shoot at 280. People love shockers and ions even they are some of the worst gas hogs I've ever seen.



...

This thread makes me laugh, honestly reading some of the reply's in this thread made me fall on the floor. Everybody want's a DM7 corssed with a mini rather than a mag.

450 psi? hrmm...never seen that in a mag before. i think most people experience shoot down at about 1000? maybe that's just me.

[cyrus-the-virus]

Can it be small enough so that my whole setup looks like a hopper and tank joined together with a barrel and trigger just sticking around? That would weigh like 8oz!

it would be 8.2153 ounces dummy, that's way to heavy, I can't even play with a gun over 8.2143 ounces....

450 psi? hrmm...never seen that in a mag before. i think most people experience shoot down at about 1000? maybe that's just me.

I run my mag on my conquest tank,which only put's out about 450 PSI. I use the gold spring on my lvl ten though. I have almost no RT ability though.

[Ninjeff]

pnuematics.

No electronics. Seriously. Give us a sweet as candy Pnuemag. Thats what i would pay for. If i wanted an electronic gun i could get one of the ones that are over saturating the market right now.

Vert frame like the chimera, light, AC threads, short, unibody, double trigger, and something that would allow you to "turn" the feed neck 90*s to have a warp feed/qloader then flip it back up to take a normal hopper.

[zeroaz]

Make it capable of being converted to a pump

[going_home]

Quicksand

Can it be small enough so that my whole setup looks like a hopper and tank joined together with a barrel and trigger just sticking around? That would weigh like 8oz!

HELP ! This thread is sinking fast .

[cyrus-the-virus]

HELP ! This thread is sinking fast .

Bull $@*% prove it...

[Ninjeff]

Make it capable of being converted to a pump

ooo. thats a good idea.

[trevorjk]

the only changes i would love to see is

1) a newly designed ON/OFF that will give consitant FPS over the chronograph no matter what type of BPS is being shot.

• by doing this you can pretty much remove the trigger rod and actually make a microswitch trigger system

2) leave the drop in valve concept for what we have now and make a new valve design with an internal air passage that also does not have such massive fluctuations in FPS over a chronograph based on FPS being shot and also remove the trigger rod

• this would open up the mag to the aftermarket world with out worries of tolerances - read number 1

3)break beam eyes

4)up to date software

[Dark Side]

4)up to date software

Have you tried Xmod?

[DocRocker]

Have you tried Xmod?

Sorry droping 100 bucks isnt worth it for that.. unless you play tourneys or something

[Dark Side]

The software is a great place to start for a project.