Introducing the Micromag 2009

[Forest_ptp]

Are you talking about the on/off pin or the sear pin? I think there is some confusion.

On/off pin.

The new sear axle pin is basically a chopped off RT sear pin (the MM2k9 body is slightly narrower than a rail) - you can use the one that we build or cut an AGD sear pin to the width of the body...

[Forest_ptp]

This is only for the MM2K9 right?

Or will that work for earlier bodies as well?

Sorry about that - I was replying to two posts (one on/off - one sear pin MM2k9) and forgot that you had asked about a MM2000 sear axle...

[Forest_ptp]

Sear pins will be made after the asa's get off the lathe for this batch of guns .

I have no idea about old school pins your talking about , unless they are the same .

The Asa's should go on the machines early next week and have a mill op after that .

If there is still any confusion on "pins" sear or on/off please let us know.

Other than that Russell should be able to get some new pics up tomorrow...

[TheePsycho]

So whats left to be milled? Gadget grips and asa?

[Forest_ptp]

So whats left to be milled? Gadget grips and asa?

I think that the front blocks were taking more time than expected - just to make sure that they are perfect. I know that the guys have been working on them all week. Russell should have an updated post sometime tomorrow with all of the details.

[ZoomZ@PTP]

Never try to machine 7075 in aluminum 6061 vice jaws :/

Numbers kept moving on us so we basicly are starting over again with steel jaws instead of aluminum .

Then theres the tapping issue with 7075 that we hadnt run into yet but is giving us lots of greif .

Tapping blind holes in the 7075 is breaking taps so now we are going to tap half the hole on the machine and the max depth on a tapping machine .

I will try and post pictures tomorrow or thursday of the front blocks when they are running again .

3 full days waisted while dicking with those front blocks

[C_losjoker]

thank you guys for the updates and for getting all those pesky little details right on.

[nerobro]

is there going to be any excess from this run.. aka, could I buy one?

[maniacmechanic]

Never try to machine 7075 in aluminum 6061 vice jaws :/

Numbers kept moving on us so we basicly are starting over again with steel jaws instead of aluminum .

Then theres the tapping issue with 7075 that we hadnt run into yet but is giving us lots of greif .

Tapping blind holes in the 7075 is breaking taps so now we are going to tap half the hole on the machine and the max depth on a tapping machine .

I will try and post pictures tomorrow or thursday of the front blocks when they are running again .

3 full days waisted while dicking with those front blocks

Old Murphy just won't give you a break , will he

[ZoomZ@PTP]

Old Murphy just won't give you a break , will he

I feel like i know him personaly :/

[wetwrks]

I feel like i know him personaly :/

You know, they say Murphy was an Optimist. LOL

[vf-xx]

is there going to be any excess from this run.. aka, could I buy one?

I'm pretty sure that there are a couple pre-order spots up for sale still.

[C_losjoker]

is there going to be any excess from this run.. aka, could I buy one?

yep matt on here has a emicro up for sale, get on it before they get done and price jumps waaaaaay up on these things.

[Tracy_ptp]

Ok gang as we finally come to a close on this project I am going to get crazy busy. I personally will be putting together and shipping every order. On top of that within the next few weeks I have a big military contract coming in. It would be in your best interest to make sure you are paid in full soon. I will pull all paid in full orders first and get to the rest when I am done so not to cause myself any confusion and try and avoid any mistakes.

[matteusz]

yep matt on here has a emicro up for sale, get on it before they get done and price jumps waaaaaay up on these things.

Thanks man. And yes I still have a spot for sale. Anyone?