Introducing the Micromag 2009

[4rpp]

Interested in this as well. I have used mine only a couple of times and finally got around to disassembling it for a thorough cleaning. I had never inspected the body before, but noticed when I stick my finger into the hole that is on the breach side, there appears to be a small ridge on the inside of the hole. I can't be sure if it was there prior as I never took it apart before and the bolt goes in and out of it easily, but curious of what a brand new body is like.

I've only put maybe 2 cases through it so far.

i had prob 10 cases in before the bolt seized

[Ando]

Sounds unlikely based on the last few posts here... but is there any way to purchase a replacement breach block for a mm2k9 body?

Thanks!

If you can get a hold of her/them. Call Tracy/PTP

And I think your picks aren't working.

[sQuidvision]

If you can get a hold of her/them. Call Tracy/PTP

And I think your picks aren't working.

Thanks! ...my pics?

[4rpp]

they were my pics, i will try to post again later today

[Drix]

i had prob 10 cases in before the bolt seized

Do we have any pix or anyone else thats having problems? I got laid off from my job shortly after reciving my gun and haven't been able to complete it but I would like to know if the thoughts of making it out of the higher grade aluminum to not need the steel washer paid off or not.

[my automag]

Do we have any pix or anyone else thats having problems? I got laid off from my job shortly after reciving my gun and haven't been able to complete it but I would like to know if the thoughts of making it out of the higher grade aluminum to not need the steel washer paid off or not.

I think if you plan on using it allot you will need a steel washer for sure.

[TimmyJay]

no offense but if you got no response after repeated attempts for 6 weeks why would you even bother anymore. Obviously your faith should be diminished by then and move on...unless you prefer to be a glutton for punishment.
People I believe are still waiting for parts purchased a couple years ago. What makes you think you are just gonna call up and get what you want ?

Is it too much to ask for to get a response? The guy that answered at PTP seemed to think they had some available. He also told me that Tracy would reply. So Yes, I had faith. I was on the list until I couldn't come up with the deposit. This isn't my first issue with PTP. Had a small issue with a warpfeed years ago...never resolved.

[wimag]

Is it too much to ask for to get a response? The guy that answered at PTP seemed to think they had some available. He also told me that Tracy would reply. So Yes, I had faith. I was on the list until I couldn't come up with the deposit. This isn't my first issue with PTP. Had a small issue with a warpfeed years ago...never resolved.

considering it took you a little over two weeks to answer my question i dont think you have too much of a leg to stand on. did i care you did not respond, nope. Would i feel compelled enough to give bad feedback based on your communication skills, nope.

good luck on your quest on getting a body based off some random person answering a phone at a manufactuing facility.

[TimmyJay]

considering it took you a little over two weeks to answer my question i dont think you have too much of a leg to stand on. did i care you did not respond, nope. Would i feel compelled enough to give bad feedback based on your communication skills, nope.

good luck on your quest on getting a body based off some random person answering a phone at a manufactuing facility.

Maybe you should have sent me a PM, since I would be notified directly, rather than a random post. Also, I am not claiming to be a business. I'm offering feedback based on my experience trying to conduct business with a business.

This will be my last post to this thread so please do not expect another reply.

[WUNDERWAFFEN]

Originally Posted by TimmyJay
Is it too much to ask for to get a response?

From Tracy & PTP that is waaaaay to much to ever ask for.

I called it back in January that we will be getting the shaft from them. Check out post #3712 on page 124.
Everybody considered me hostile for that comment back then, how does it fly now 8 months later.

Forgetting about the shirts, has anybody ever received their refunds for the other screw ups?

[Drix]

Every time I read this thread I feel more and more like I'm owning a piece of paintball history- Something sort of epic in the mag world like the delorian or the pinto to cars or something. I'm actually looking forward to it in say 20 years.

Anyhow, with that being said, perhaps we should think about getting a singular point person for Tracy and PTP as opposed to having multiple people running them down all the time. We can get a spreadsheet going of People who havent recieved bodies, people who have mechanical issues, people who are due money for sear pins, people who need extra X, and of course, people who would be pleased with t-shirts, and other problems of miscellany.

I'm willing to run point on this as long as I don't get totally raged at by fellow AO'ers. With that being said it may, or may not help. I'd be inclined to say it'd shrink Tracy's daily consumption of asprin and increase efficiency, and put all of our problems in a single place.

[luke]

Set it up and they will come.

[Drix]

Set it and they will come.

Right, so we'll give this a try maybe.
Basics:
AO Member
AO Member details up to date

Issues seem to be:
Shipping:
1. Body not recieved
2. Grip not recieved
3. ASA not recived
4. Barrel not recieved
5. Origonal Parts Not reived
6. Shirt not recieved
7. Anno'd correctly

Mechanical:
1. Front Block issue
2. Breech issue
3. Body Issue
4. Grip Issue
5. ASA issue
6. Sear Pin issue

Monetary:
1. Not Paid
2. Awaiting refund for sear pin

Just fleshing out what this spreadsheet might look like. Have I forgotten a category?

**NOTE: These are possible problems, not representitive of problems people are having, I'm NOT surfing through 2K posts to find people's specific beefs and mention them, so if there's a problem I missed speak up, if theres a problem not had at the moment we'll leave it an empty column.**

[WUNDERWAFFEN]

Drix you are under the belief that they still care & have not already walked away from this

[Ando]

Drix you are under the belief that they still care & have not already walked away from this

I got an email from tracy on 8/31/2011 about shipping my parts...still...nothing