Round Two

[jade_monkey07]

so this respring will help it reset better?

[Stayhuge]

yep! send it in for a free re-spring!

or you can make your own to save a little time. The spring is cut from a bic lighter. just cut one a little longer and stick it in. set it with a little tension and you're good to go!

So you are saying that you have about 70 springless lighters lying around???

[Shirow]

Can't wait for this... my dream mag is almost complete!

[zondo]

#7!

[kszyszkowski]

That may be a naive questions but I'm going to ask it anyway.

To hold the cheater within inteliframe you need to use original screws that keep rubber grip onto inteliframe or you need longer ones ?

If the longer ones are required - are they in the kit ?

[xero28]

That may be a naive questions but I'm going to ask it anyway.

To hold the cheater within inteliframe you need to use original screws that keep rubber grip onto inteliframe or you need longer ones ?

If the longer ones are required - are they in the kit ?

Actually, you will probably need shorter ones since the cheater sits right up against the inside edges of the frame. Mine was one of the first and I didn't get any screws with it, but I seem to remember Zap saying he was going to send the proper length screws, though I may be totally mistaken. I just went to the hardware store and got the correct length.

[Shirow]

So, didja start shipping yet Zap? Didja? Didja? Didja? Didja? Didja? Didja? Didja? Didja?

Well, didja?

[Stayhuge]

So, didja start shipping yet Zap? Didja? Didja? Didja? Didja? Didja? Didja? Didja? Didja?

Well, didja?

We are all like kids in a candy store!!!!

[Daze]

OK, my camera died and (according to the wife) we CANNOT have baby's first Christmas without one so my cheater spot can go to someone else if they want to pay straight across for it. PM me if you're interested and we'll sort it out. I ordered an oring kit and foot of hose so the total is $104.

[ZapTheMad]

Santa is on the way! Final quality control and packaging took longer than expected! Man it takes forever to go thru all the paperwork and crap. What I thought would be a few hours worked out into a few days.

1 thru 28 shipped.

Freebie for contest winner Mark shipped.

Replacement for Anthony shipped.

2, 9, & 25 not shipped, waiting for installation.

29 thru 42 waiting on fittings to come in. Should ship early next week.

Working on installs over the weekend.

*edit* 2 is ready for pick up actually.

[ZapTheMad]

So you are saying that you have about 70 springless lighters lying around???

More or less, YES! I'm a smoker so I have piles of dead lighters

[Swamp Thing]

Number 9

Glad to hear the news. Can not wait to see it in my stormwalk

Swamp

[greezypete]

Woo Hoo , they are on the way. Cant wait.

[zondo]

More or less, YES! I'm a smoker so I have piles of dead lighters

Sounds like loads of fun at the bonfire...

[ZapTheMad]

I'm glad you mentioned this because I forgot to say with the last run...

I could not find any screws that were better than the stock Intelliframe screws. The stock screws will work fine. But if you're "picky" you can file them down a little shorter for a perfect fit. They don't need much, maybe 1/16" or so shorter.

Of course this all depends on what screws and grips you have. It fits pretty good with stock screws and sticky grips, which are kind of thick. Other grips probably need a little shorter screws.

The most important thing is just make sure you don't over tighten them and strip out the threads on your frame.

Actually, you will probably need shorter ones since the cheater sits right up against the inside edges of the frame. Mine was one of the first and I didn't get any screws with it, but I seem to remember Zap saying he was going to send the proper length screws, though I may be totally mistaken. I just went to the hardware store and got the correct length.