LCE-Mag frame conversions.

[luke]

Let me see what's in the box before I answer that.

I'm not expecting anything in the next few days so I can get right to yours ...

[StygShore]

box-o-stuff

Eh nothing too scary in the box, and don't mind the ticking sound

Neh, just all the parts you asked for + the bouncebeam eyes, and some lense material if you end up making a bracket underneath the body. I had to send my drop forward and a few extras becasue I have a weird QD on one side of my line that I cant seem to find another one of.

I shipped it with the battery disconnected, and everything is in sections wrapped nicely. I sent a check list of all the parts that should be there, so if you have any problems catch me on here or give me a call, my number is on the paperwork.

Styg

[luke]

Eh nothing too scary in the box, and don't mind the ticking sound

Neh, just all the parts you asked for + the bouncebeam eyes, and some lense material if you end up making a bracket underneath the body. I had to send my drop forward and a few extras becasue I have a weird QD on one side of my line that I cant seem to find another one of.

I shipped it with the battery disconnected, and everything is in sections wrapped nicely. I sent a check list of all the parts that should be there, so if you have any problems catch me on here or give me a call, my number is on the paperwork.

Styg

Sounds good, I'll let you know when it gets here.

[Tack]

Luke

I have several people that may be real interested in this mod that come into my store, If I get one I think I can drum up some more business for you. One question, Have you converted the new Spyder double point trigger (I am at home so I can't think of the name of it but I have one in my shop)? If so, I have the frame and a mag that I have been thinking about working on, how much would it be if I sent you the frame and mag?

If you dont' want to put that type of price on the forum, feel free to email me at [email protected] or pm me here.

Thanks
Tack.

[StygShore]

whats up doc?

Well, you got the box.... what's the prognosis Doctor, can you rebuild it... make it faster? heavier? ( damned pot metal spyder frames )

Keep me posted, and if it works good you can use it as your poster boy for your adds.



Styg

Sounds good, I'll let you know when it gets here.

[luke]

new Spyder double point trigger (I am at home so I can't think of the name of it but I have one in my shop)?

I think it will be fine. From what I can tell it is pretty much an ESP frame where it matters to me.

If so, I have the frame and a mag that I have been thinking about working on, how much would it be if I sent you the frame and mag?

Labor is $100, with a free install. (Shipping and PayPal fees apply)

You will need to send all the parts in, minus the barrel and air system, please include you ULT parts.

[luke]

Well, you got the box.... what's the prognosis Doctor, can you rebuild it... make it faster? heavier? ( damned pot metal spyder frames )
Styg

Yup, got it yesterday, gonna get crack-a-lack-a-lin on it this morning.

Did you get the T-Board installed and running? I haven't looked at it yet and don't recall from previous conversations.

Gonna send you a PM about the eye in a 1/2 hour or so...

[StygShore]

frame n stuff

T-board is set with factory defaults, has some decent speed to it, but the debounce and dwell could deffinatley be adjusted lower to get a faster rate of fire.

Styg

Yup, got it yesterday, gonna get crack-a-lack-a-lin on it this morning.

Did you get the T-Board installed and running? I haven't looked at it yet and don't recall from previous conversations.

Gonna send you a PM about the eye in a 1/2 hour or so...

[luke]

Posted a new video on Jayloo.

Check out the Karta-SpyderMag>> here.

[StygShore]

sweeeet

lookin good!

Cant wait to get it back and test everything out.


Noticed a couple of double fires in there? was that becasue you were putting in 1000psi to the valve?


Styg

[luke]

I think your trigger switch is too light unless there is some kind of setting on the board. It will auto fire if the trigger is adjusted up without slack. I put some slack in the trigger and put the return spring on the trigger and it helped a bunch. But like you saw it did take off.

As I under stand it this is a problem with the lighter switches...

I had to check one of your posts, you say it's a 50g, I heard less than 80g would lead to runaway. I can adjust this where it will sweet spot if you look at it wrong....

[StygShore]

Yeah, it is a 50g switch, came with the frame. Probably with the T-board it makes a bigger difference than the stock board does.

There is a debounce setting that can be adjusted up to maybe help with the runaway.

If you didnt mess with the settings at all, I think default debounce is 2. If you get a chance, up the debounce a little to like 5 or 6 and see if that will stop it from runaway. If not, I may have you switch out one of your 80g switches for me. I sent it with a cut spring for the trigger, is that the one you used, or did you use another you had around?


Does dwell seem to play any type of role with this setup or are you just using the stock dwell settings?


Let me know


Styg

I think your trigger switch is too light unless there is some kind of setting on the board. It will auto fire if the trigger is adjusted up without slack. I put some slack in the trigger and put the return spring on the trigger and it helped a bunch. But like you saw it did take off.

As I under stand it this is a problem with the lighter switches...

I had to check one of your posts, you say it's a 50g, I heard less than 80g would lead to runaway. I can adjust this where it will sweet spot if you look at it wrong....

[StygShore]

input

Could input have anything to do with it as well? I only run 800 psi into the setup usually becasue 900+ was causing runaway with my mechanical trigger. I thought you had told me you were going to just run 1000 straight into the valve for the last tests since the tank was almost empty.

Styg

[Thatcher]

gey those mokals in?

[PnueMagger]

As soon as I Get some cash together I'm sending my super-Micromag in with my dragun frame. Just promise to continue this mod for a while. (I'm super short on cash and am counting the days untill I can blow another hundred on Paintball)

edit: BTW, I finished that shortened mag valve with the reg cap and a vert PMI pure energy reg i had lying around. Haven't tested it yet, but hopefully the PMI reg is good enough.