ALL about the WARP-FEED

[alexpaintballer]

can i put a warp feed on my standard feed automag or do i need a new body?

[Brettski]

Do you have to use the Warp on an electronic marker? I'm thinking about putting one on my Tippmann.

[temilotzin]

Do you have to use the Warp on an electronic marker? I'm thinking about putting one on my Tippmann.

No, it's sound activated so go ahead and put one on your tippmann.

[Brettski]

Sound activated?

[tribalman]

it's more vibration than sound. if you tap on it the warp will spin. if you clap/snap near it, it won't spin. a tipmann will work with the warp.

[phizz]

Left body want warp feed

I recently purchased an automag Rt, it is left feed. I read the manuel on the warp drives says they may not work well with left feed, can I do anything about this? Second is it possible to have a left feed and mount the Warp on the left side as well? Sorry probably a dumb question, but i'm new to the mag world.

[Tao]

I recently purchased an automag Rt, it is left feed. I read the manuel on the warp drives says they may not work well with left feed, can I do anything about this? Second is it possible to have a left feed and mount the Warp on the left side as well? Sorry probably a dumb question, but i'm new to the mag world.

By left feed to you mean left handed? If so I am left handed and my warp works just fine.

[ghostinthewood]

HOw would i go about mounting a warp on my '96 Right Feed Autococker?

[wallify]

I just recived mine for my ION and I cant for the life ofme figure out how this is suposed to go together. I know how to mount the feed, but the hose looks like im going to need either some sort of adapter or maybe I can just wrap some electric tape around it, and my revvy dosnet seem like its going to fit either. Am I missing something, or maybe just slow or what?

[buzzboy]

Take the 90* adapter and saw the part that sinches down off of it. That part goes into your feedneck. Then the double female attaches to that.

[famousgamer]

Can one seperate the battery housing from the warp drive part, like this...



I know it would be tricky, but is it possible?

[voodooaddict]

Can one seperate the battery housing from the warp drive part, like this...
[removed image link to unclutter]
I know it would be tricky, but is it possible?

Very cool idea.

There are two possible problems that I see with that.

1. The first turn the balls need to make. That's a pretty sharp turn you have them making. It looks like more then 90 degrees coming right out of the warp. I once tried using two powerfeed elbows on my e-cocker to get rid of some hose. The warp didn't have enough force to reliably push the balls through both turns.

2. The feed into the warp looks like it might jam up. That's a wierd angle to feed and without any agitator you'd probably need to shake it alot.


Maybe placing the warp unit more verticly? Running external battery like that shouldn't be a problem.

[LoveMyMagMoreThanYou]

Can one seperate the battery housing from the warp drive part, like this...



I know it would be tricky, but is it possible?

Running a remote battery isn't the problem with that setup. It's more what the guy above me had to comment about.

I DO like the concept though. Tell me how it works out!

[voodooaddict]

Ion/SP-8 Intellifeed

Going to be hooking a self made Intellifeed harness to my SP-8 this weekend.

I need to get the hopper off the top of that beast. And I've been missing my old warp setup.

[warpspyder]

Can one seperate the battery housing from the warp drive part, like this...



I know it would be tricky, but is it possible?

Where there's a will, there's a way my friend.