ALL about the WARP-FEED

[UTDragun]

2 9v's in parallel only produces 9v of output. I was talking about some people were connecting two 9v's in series for 18v of output, and that was frying the board.

i knew of that, but my friends board melted cuz the motor got extremely hot
why dont they make a 18v board?

[Vomitsquad]

BooYaah Elcd frame connection to Warp interface?

Is it possible to connect a BooYaah E-LCD frame to the Warp interface in some way, like you do with the intelliframe? Could you maybe just solder tha cables directly to the trigger microswitch?

[trains are bad]

you would be better off soldering the cables to the solenoid wires. See the 'warp to angel' guide on airgun.com.

[theVicious1]

I own a custom 98 and want to put a warp feed on. what's the difference between the agd and proteam models? so far all I can tell is some kind of angled feed neck for non-automags because of the automags slanted feed tube that allows ball entry from the bottom. the price difference between the two kits is huge, and I'd obviously like the cheaper of the two. what can you guys tell me?

[B.A.M.]

I own a custom 98 and want to put a warp feed on. what's the difference between the agd and proteam models? so far all I can tell is some kind of angled feed neck for non-automags because of the automags slanted feed tube that allows ball entry from the bottom. the price difference between the two kits is huge, and I'd obviously like the cheaper of the two. what can you guys tell me?

I also think there is a difference in the plate that connects the warp to the gun.

[theVicious1]

Is it something I could work around? And another concern woud be the method of activation. does the agd model come with a vibration sensor so it could feasibly be used as a universal application? And thanks for any help you guys can give me, I know I'm not an automag owner but this was the only place with a dedicated forum to the warp feed, and furthermore it isn't occupied by idiots. ever been to the pbstar forums? nuff said.

[ben-afficial]

im just testing, cuz it still sais i cant post a reply

[ben-afficial]

why do all people assume the warp can only feed 12 or 16 bps. dont you people shoot fast? Ive hooked up a warp to a spyder with a rocker trigger and the warp kept up to 30 bps.

[theVicious1]

Hey fellas, just thought I would follow up on my question with an answer. Yes the AGD warp feed works on the 98c, and yes it is bad @ss! I just put a hopper through it and it freakin rocked! sideways, upsidedown, and all over it kept shooting. I thought it might not kee up with my response trigger since I only have the single 9 volt power supply, but when I let it rip the warp feed kept up, and even managed to slip more than one round at a time past my ball detent. that is my only bad experience, but I justinstalled another jumper(making for a total of 2) so hopefully that will solve my problem. Other than that I am way happy with the product, it's performance, and it looks awesome! I like the looks, I didn't think it would look that good. the Apache hopper I've got on it just goes perfectly, I didn't need to melt/cut up my hopper at all, the apache's nose is angled just enough to let the tube rise unhindered.

Bottomline: AGD warp feed works on my 98c, so you don't have to buy the overpriced proteam model. thanks AGD, great product. If I ever go with another marker besides my Tippy(it hurts to even say that) I'm definitely getting one of your markers. The tac-one looks sweet!

[E r y k]

agd feed.

[wanna-b-ballin']

i dont know if this was mentioned in the last 20 pages, but how can i adjust the warp so that it doesn't feed the balls so hard?
it is pushing them really hard, the paints shells are actually flattening under the pressure.
it is breaking lots of balls in the chamber, and has chopped a few. i think it is pushing the balls past the nubbin.
so how do i do it?

[Glickman]

why do all people assume the warp can only feed 12 or 16 bps. dont you people shoot fast? Ive hooked up a warp to a spyder with a rocker trigger and the warp kept up to 30 bps.

you shot 30 bps on a spyder...

never the less with a rocker trigger...

[B.A.M.]

i dont know if this was mentioned in the last 20 pages, but how can i adjust the warp so that it doesn't feed the balls so hard?
it is pushing them really hard, the paints shells are actually flattening under the pressure.
it is breaking lots of balls in the chamber, and has chopped a few. i think it is pushing the balls past the nubbin.
so how do i do it?

well if you have a 12v mod or the big cell then just take on of the 9v off and use one.

[ben-afficial]

jsut leave soem paint in your warp for a couple days and the pressure plates should bend out thus not have the same gripping power they have now

[E r y k]

is it modded?

get new detents for the gun perhaps, there might not be anything you can do about it