ALL about the WARP-FEED

[p8ntblljnkie6191]

when i opened up the case on my warp to clean it a little spring fell out
what is this and do i need it.

[03visionshocker]

PBRB battery voltage regulator

Are you using a battery voltage regulator? mine got real hot wen i dint have one, and also are your battery or wires touching the motor?

[JoyInTheMadness]

what speed is the warped capable of?

[Havoc_online]

most of your questions can be answered by just reading through the posts. If you want a bit more info, goto the warp section of my site.

[PaintSkater00]

My problem is when im shooting the warp isnt continually feeding, it stops and I have to shake it and press the white button to get it feeding again. I think it might have to do with the dwell time because I didnt do anything to it when I bought it.

Havok, when you say set your dwell time to 1/4 what do u mean by that? There are 4 jumpers there but how would i set it to 1/4?

[Auto_Rook]

if i bought one of these.. would it make my 12vlt wit x board and vortex impeller shoot like 18?

[yakitori]

Ive got a tippmann 98 custom w/ respsone trigger. The RT gets up to 15bps sometimes, but I would only be doing that in bursts. I am getting a Warp for my tippy and putting an empire reloader on top of it. Do you think that I will be outshooting the warp/reloader, assuming I only use it for bursts? Maybe like 6-8 ball bursts or so. Also, I am thinking of just setting the warp on vib. I dont think this will be a problem, but is that what you would recommend for a tippmann. EDIT: it is a 9V warp. I dont think I need to do a 12V mod. Thats just too fast for a tippmann.

Also, it is a new warp, I was wondering how long the break in period is. I also tried the links in the very first post in this thread and not all of them have worked for me.

Thanks for your help, and very informative thread. Wish i had the time to read through all 18 pages. :)

yak

[pANAMONCREEL0]

Itellefeed question

I have an excal and i am trying to hook it up to the microswitch. Did the exact same thing as the angel but my wires were black and black. Hooked it up and i will constantly feed with or without the trigger.tried reversing wires, took an volt reading and its reading a -3v, so i tried the negitive setting instead of positive nothing. Left it be until today whe i figured out that i left it on all night last night. Batterys were about dead but still spinning slow and it seemed to work with my trigger pull. But with fresh batteries it just keeps spinning. To rule out that the brushes were making noise i took out the vib sensor jumper, so its not that???????


Help im not sure what to do?????

[cr@ckhead]

how much power will a warp board take?

i have my warp
intellifed
big celled
LED'ed
on/off

but i want to run my rico off the warp. i was planning on running 3 9v's in parralel (2 for the warp and 1 for the rico).
then, i was going to run wires off the warp motor and connect them to the rico motor (completely bypassing the rico board). this way, when the warp spins, the rico does also.

would it work? would the warp and rico both get 9v? or would the power get split?


does anybody have any other ideas to run a rico off a warp, without "bogarting" the warp's power supply?

[B.A.M.]

Can u put a halo b on the warp feed and can it work on a ule center feed body

[JT2002]

yes you just need the right fitting to work on your ule body, i used to put a halo on my warp, feeds VERY fast, even faster if you put 12v or bigcell mod on teh warp

[durtysoufcraka]

i read a post a while ago about a mod that you can put on your gun to run your hopper and warp off of your emag batter. aparently this cuts down on weight like woah cuz 4 9v batteries are kinda heavy and then you'd just have to recharge your emag battery the day before you played. does ne one know where to get this mod?
-durty

[durtysoufcraka]

i have another problem. aparently i pulled the red cord that goes to the 9v battery out of the circut board...so the black one is connected but the red isnt...what can i do about this?
-durty

[atm743]

i have another problem. aparently i pulled the red cord that goes to the 9v battery out of the circut board...so the black one is connected but the red isnt...what can i do about this?
-durty

hey i did that befor its sucks well i sodder it back if i spelled it right but the thing is it wasent to the circut board there was this little black box were the batties rest were all of the wires connected. soo i am not sure if you would still sodder it. im thinking that you will have to re-spice it together.

[durtysoufcraka]

so just a little solder action...now how do i do that.
-durty