ALL about the WARP-FEED

[JT2002]

not with my empire timmy floatin around!

[tonybhall]

Warp with egg question

Hello everyone,

I am sure this has been asked before but after over an hour of searching I have not been able to find the answer. I actually asked this question outside this thread and got very few replys so I thought I would try it here.

I just ordered a warp feed for my ULE RT Pro. My hopper is an EGG. Several people have told me the Egg does not fit the warp right and that it will stick out in the back real far and hit my mask. I read one post that said you could turn the egg around backwards but that makes it harder to load. Someone told me I could mount the Warp backwards and that would solve the problem. Any thoughts on this?

Any suggestions on the best way to put an EGG on a warp?

Thanks,
Bryan

[dyst0pia]

I am not sure whether my question is somewhere in the previous 16 pages of this topic, but I am curious as to whether I would have to purchase anything other than the $90 warp feed to make it work?

In the pictures there is just the actual warp feed, no hoses or fittings. Do I have to buy those seperately? If so, what all do I need to mount a warp on a PF HR minimag?

[JT2002]

dont get that one. keep looking. u should be able to find complete warps for 90 or so.
look for it to come with...
warp
mounting bracket
the screwws for bracket to gun adn bracket to warp
hose
90* adapter
hose fitting for the warp (black hard tube that hose goes into to connect to warp.

[PRPB]

Originally posted by Havoc_online
PRPB - try switching to heavy duty battery connectors

PaintSkater00 - hook up a battery, press the white button until the battery dies, then your done.

Ok I tried a different battery connector, but the battery still over heats when I turn the switch off. I have no idea what is wrong with it. this is what I have.

[Havoc_online]

take off the black wires from the switch. They stay connected.

move one red wire to where the black wires were.

[PRPB]

Thanks!!

[Magz_rule]

I finally got my agd warp w/ 12 volt mod and on/off. I tinkered with it for about 2 hours last night cleaning and oiling it. When i tested it it worked when i pushed the white primer button but i couldnt get it to spin when i hit it. Do I need the sound of the gun to make it spin? Im pretty sure i have it set up for vihration(bottom one of the 3). Also when i put balls in and held the white button it would feed for a little while then would just stop. Are my balls to big for the warp? They are dbx practice paint. One more thing, what would I need to hook my warp up to my intelliframe? Thanks

[Willystyle21]

to PRPB

Might be too late but sounds like the switch is shorting the battery in the off position. Like ahvoc said prolly got some wires backwards.

[jpdgas]

Hopper to warp

I've had problems keeping my revy on my warp (the gf's too). My feedneck on the revy is smaller than the hole in the warp to the extent that I have had to wrap duct tape around the revy to keep it there. The problem with that is when paint gets on it, it gets slick and can get bumped out anyways (not to mention its ugly). My gf just got a ricochet which works much better, but i want to keep my revy.

Any ideas on how to secure it to the warp? i was thinking a set screw or something, but i dont like making holes in the shell if i don't have to. Thanks

[JT2002]

if ur up to it try and get some pvc to create a spacer

[hellspawnfish]

Hi all. I got a BM2K with a warp feed on it and I keep chopping paint
I once saw a digram as to were paintballs should sit in the feedneck saying if it looked like this you will chop paint and if it looks like this you wont. Does anyone know of this diagram as I think it could solve my problems.
Please help...

[Jazkal]

it's in this thread, near the front. page 2-5, I think.

[oiewajr]

Warp promblems

i stopped playin paintball for the winter and when i got my warp bak out it just didnt work so i put new batteries in and it still doenst work

[barrel break]

Hmmm, so to mount an AGD Warp on my cocker, what would i need?