ALL about the WARP-FEED

[JT2002]

did u try replacing the battery? also did you try a new oring for the drive? also that led coudl be sucking some big power out of ur 9v. are u electric savvy at all? can u do solder work? lmk

[autodude]

i have heard that sometimes with the warpfeed, there can be a pause in you shots where itl just dry fire due to the fact that your hopper may jam or some other reason. when you intellifeed the warp feed does it fix this problem?

[JT2002]

a warp on any gun imo should be intellifed. but, will intellifeed warp fix a jammed hopper, no. but thats what 12v revvys and halos are for

[PNTBALL104]

Well the situation is that i just got my tank and df in, i put um on along with the mounting plate for my warp, the warp itself with not fit the mounting when facing the mount plate the usual way do to the gauges on my 68/45 dynaflow. I was going to try to turn the plate upside down and rotate it 180* (if you can try to picture that) so that it would be basicly the same but the piviting part would be directly under the grip....I ran into a problem, the tank will not come off of the df, its a cp flame and ive tried as hard as i could to get it off, Ive tried to use a rubber mallet cautiously for fear of hurting my baby, no dice. I would try to put some gun oil to possibly give it a little lube, but i have none. if you can help, please let me know. I can take pics if it will help.

[JT2002]

you have to loosen the set screw in the drop in order to be able to take teh tank off the rail. look towards the forward of the drop, on the top side of it, and look for a hole with an allen screw in it, unscrew that and try to take it off

[PNTBALL104]

Unfortunally I did that already, it wouldnt move even after that. I have pics, but there were some errors when I was trying to attach them. If anyone has a website they can post um at for a coupple days, it would be most appricated. Hit me up on aim at PNTBALL104.

[willard490]

what is the "big cell"? And does the 12v conversion make a big diff?

[Recon by Fire]

Big cell lets you run the warp at the standard 9v but using two batteries instead of one. Running 12v increases the speed of the warp, I believe it is about 8 BPS higher than 9v.

[willard490]

Ok thank you , but I have another question I put a on/off switch on my warp but it was not really working what i mean is that the warp would run slower. Its probaly not the right switch im supose to use well i need to get the right switch, could i use a switch off a remote control car or somthing similar to that?

[Recon by Fire]

I have no idea on the switch type, I am 0% clueless when it comes to electrical work. I had BradAGD install a on/off switch for me, and the big cell too. I have a PTP 12v wire for the warp also, not sure if I can run both of those together....???

[JT2002]

talk to havoc, he does all this stuff

[Lawdog4817]

Holy cow guys. I just got the 12v mod from pro-team today and added it to the warp. Holy cow! This new mod helps greatly. What a big difference it makes!!

[XzIpK21]

Sorry if this question was posted in this thread already.. there is alot of posts, and I would die finding what I need. Anyway, I should be recieving my brand new warp from AGD tommorow, and my question is, what should I do when I just get it other than mounting it,adding batteries, hooking up intellifeed, and hooking up hose?

[JT2002]

well what gun are you hooking it up to. if its the emag, lmk, because i have the exact AGD intellifeed cable you need, NEVER used, basically new and ill sell for real cheap

hose. if its goin on ur micro e i think u might need to buy the PTP adapter. id also suggest if u have 3.2, while ordering the adapter from PTP also get the 12v mod.
thats pretty much it. oh, dont forget that you need to set the lower right end dip switches for intellifeed, i think it says how to do that in manual. then u can also adjust dwell.
nite

[XzIpK21]

Mkkay, got it all set-up, thanks JT2002. No need for a PTP adapter ($30!!!! ).. I just modded the one AGD gave me.
Now, for my next question, where exactly do you lube the Warp? Anywhere there is friction? It says to lube the gears, shaft, and feed wheel..What is the feed wheel and shaft? And where do I apply the lube to those?