Tiberius Sniper Rounds, Info from TK

[drewkroeker]

I'm thinking I need to get a ULE warp left body and have someone mill it to accept these rounds and then put a stick feed on it. As far as a rapid-feed system goes, the drum type magazine on the FN 303 seems like a good bet, although this would require considerable modification to any gun it was used on. Since mags are so modular, they would be one of the easiest guns to work with, I should think.

[teufelhunden]

ramrod?

I DON'T WANT A LARGE FARVA, I WANT A *GOSH DARN* LITER OF COLA

[Sundown]

All they need to do is package them differently.

Instead of like this

{ { { { { { { {

They need to be like this

}
}
}
}
}
}
}
}


Then you just stick the tube into your vert feed marker with the rounds facing the right direction.

Gravity will take care of the rest.

hmm.. this might actually work.. depends how well they would ''move'' into the breech or in the tube.

you might need to hit the tube to make the paintball move

[Smoothice]

I DON'T WANT A LARGE FARVA, I WANT A *GOSH DARN* LITER OF COLA

Edit Pic removed.

[Smoothice]

hmm.. this might actually work.. depends how well they would ''move'' into the breech or in the tube.

you might need to hit the tube to make the paintball move

How could it work? Its TOO simple.

Everyone wants to make some magical mystery loader for these. The easier the better if you ask me.

Yes it may require a redesign of their current packaging so the tube would fit them in a new direction. But that would be the easiest fix.

[manike]

That would work for packaging, but you'd still need to have guns with a different feedtube and breech to get them to load. That's one of the tough issues to making this a success. The availability of guns that can shoot them easily.

I have a few tubes of rounds, and so far they are very impressive. I'm in process of modifying my FN303 to shoot them at under 300fps.

[custar]

I noticed Tiberius said they were producing a rifled barrel as part of their conversion kit. I wonder how much of a difference that makes.

custar

[MANN]

I'm in process of modifying my FN303 to shoot them at under 300fps.

could we see another go at paintball for AGD? maybe a FN303/mini child of marker?

[Looper]

could we see another go at paintball for AGD? maybe a FN303/mini child of marker?

Ok, the thought of that just got me excited.... I need to go get clean up now.

[cpt.maverick]

Hey Cockerpunk - I just recently saw some of PunkWorks stuff for the first time and I have to say I applaud you guys for doing this kind of thoughtful and useful service for paintball!

On to FS Rounds: One of the big questions I have is: What will the new bolt for tiberius arms guns be like? One thing I'm concerned about with these rounds (and trying to devise a scheme to get them into other guns) is whether or not a 'regular' bolt will hurt the skirting on these new rounds when they are pushed forward. I don't know for sure but I would imagine that TA will have some kind of tapered bolt that will push on the inside of the skirt rather than the outside but I would be interested in any info anyone has.

[cockerpunk]

Hey Cockerpunk - I just recently saw some of PunkWorks stuff for the first time and I have to say I applaud you guys for doing this kind of thoughtful and useful service for paintball!

thanks! we do our best.

[Beemer]

Holy cow this forum rocks. Nice test vids and good info thanks. But backup the truck to two hundred feet and test against a BALL. The advantage aint up close with these BUT down range. At one hundred feet I will still take this round tho. At two hundred feet its all I want.

Your barrel bore is to tight. Start at a .689 for testing. Any LESS is to tight. Whats up with the velocity. Dont we have guns that can do 290FPS plus or minus one or two FPS??

On the break test I saw a half a dozen balls droped at about six feet on concrete and everyone broke.

Did you guys Mic these things out??

These should work great in an SMG68.

Heres the thing. Sight this round in on your rig at 290FPS at 200 feet, Then drop in a ball at the same weight and close bore. You wont even hit the target.

Or think of it like this. The Tiberius round 3.1G at 290FPS at 200 feet.
A 3.1G nylon ROUND ball with perfect bore barrel at the same FPS at 200FPS it wont even HIT the target. Why?, cause it dont hold VELOCITY down range.

Just my two cents worth. You guys ROCK and keep the info comming its what we want.

[teufelhunden]

I think I've played once since summer of 2004, and this has me considering seeing what I have in the attic to ball with... or seeing what one of these guns runs.

[Smoothice]

That would work for packaging, but you'd still need to have guns with a different feedtube and breech to get them to load. )

So if measuring these rounds tip to tail they would not fit into a standard feedneck?

hmm. I guess x/sfl's, micromags, galactic z's, and anything else with a removeable breech will be great candidates for having new breeches made that will work.

I guess I could just keep the breech off my xmag and hand load these in faster then you can remove a barrel

[cockerpunk]

Holy cow this forum rocks. Nice test vids and good info thanks. But backup the truck to two hundred feet and test against a BALL. The advantage aint up close with these BUT down range. At one hundred feet I will still take this round tho. At two hundred feet its all I want.

Your barrel bore is to tight. Start at a .689 for testing. Any LESS is to tight. Whats up with the velocity. Dont we have guns that can do 290FPS plus or minus one or two FPS??

On the break test I saw a half a dozen balls droped at about six feet on concrete and everyone broke.

Did you guys Mic these things out??

These should work great in an SMG68.

Heres the thing. Sight this round in on your rig at 290FPS at 200 feet, Then drop in a ball at the same weight and close bore. You wont even hit the target.

Or think of it like this. The Tiberius round 3.1G at 290FPS at 200 feet.
A 3.1G nylon ROUND ball with perfect bore barrel at the same FPS at 200FPS it wont even HIT the target. Why?, cause it dont hold VELOCITY down range.

Just my two cents worth. You guys ROCK and keep the info comming its what we want.

1. they claim a 25x accuracy boost, so bryce tested for that
2. we did our own break test with the same rig so we could compare to the other types of paint we have tested before, again, i wish the sample size was larger
3. they are .684, i measured one in my video which makes me wonder if you actually watched them
4. we have shown again and again that underboring is the ideal, thus bryce used as small of a barrel as was possible.