Tiberius Sniper Rounds, Info from TK

[MANN]

4. we have shown again and again that underboring is the ideal, thus bryce used as small of a barrel as was possible.

QFT

[DevilMan]

So if measuring these rounds tip to tail they would not fit into a standard feedneck?

hmm. I guess x/sfl's, micromags, galactic z's, and anything else with a removeable breech will be great candidates for having new breeches made that will work.

I guess I could just keep the breech off my xmag and hand load these in faster then you can remove a barrel

ummmm.... except the Z body don't have removable breech... and to get the XMag breech off you gotta pull the barrel...



I already thought of that one.... Now I'm just leaning towards running a twist lock body...

That should make it quick...

DM

[DevilMan]

1. they claim a 25x accuracy boost, so bryce tested for that
2. we did our own break test with the same rig so we could compare to the other types of paint we have tested before, again, i wish the sample size was larger
3. they are .684, i measured one in my video which makes me wonder if you actually watched them
4. we have shown again and again that underboring is the ideal, thus bryce used as small of a barrel as was possible.

For a standard ball perhaps... keep in mind these are made differently from different shell material. I'd love to shoot em out of a 693 or 695 barrel personally....

Just to see where they go.

DM

[Beemer]

3. they are .684, i measured one in my video which makes me wonder if you actually watched them

Hmm it would seem I missed one here. I will Look again. Mind posting the link again. Was it in this thread??? Sorry my bad I missed it. And ya I do watch them. Dont swear in your vids.
I saw that one and let it slide. Post number 141 of yours in this Thread with vid links. like i said guess i did miss it. Its all good, keep up the work. Info is what we want.

[cockerpunk]

Hmm it would seem I missed one here. I will Look again. Mind posting the link again. Was it in this thread??? Sorry my bad I missed it. And ya I do watch them. Dont swear in your vids.
I saw that one and let it slide. Post number 141 of yours in this Thread with vid links. like i said guess i did miss it. Its all good, keep up the work. Info is what we want.

oh maybe i didn't post that one. its on my personal youtube channel www.youtube.com/gerglmuff

[Beemer]

oh maybe i didn't post that one. its on my personal youtube channel www.youtube.com/gerglmuff

Oh ok so not my bad your bad. I did not see that vid you did not post it here.
Well done.......

You are off on the mic. You have to measure at the fins for a bore fit. it is slightly tapered to the plus at the fins. I mic'ed this round every wich way. I wonder did you read my other posts in this thread??[just messing with ya] At the fins I get about .688, .689.

The fins are about .004.

You also mentioned the buzz word Paradigm twice in that vid. Thats what it is, a shift in the Paradigm.[paradigm shift] You have to get out of the box. The rest of the industry can stay in the box with the sphere but there will be a percentage that will step outside and have the advantage with this round and they will mod it to make it work.

[cockerpunk]

Oh ok so not my bad your bad. I did not see that vid you did not post it here.
Well done.......

You are off on the mic. You have to measure at the fins for a bore fit. it is slightly tapered to the plus at the fins. I mic'ed this round every wich way. I wonder did you read my other posts in this thread??[just messing with ya] At the fins I get about .688, .689.

The fins are about .004.

You also mentioned the buzz word Paradigm twice in that vid. Thats what it is, a shift in the Paradigm.[paradigm shift] You have to get out of the box. The rest of the industry can stay in the box with the sphere but there will be a percentage that will step outside and have the advantage with this round and they will mod it to make it work.

the largest diameter is not the fins.

it is a paradigm, but i frankly dont see that shift in the near future. if tib can sustain the production of these things long enough, maybe. but to do that you need to make a profit, and to do that you need to have a high cost, which prevents what your are trying to get - wide spread acceptance.

we'll see. but i wont be selling my sphereical paintball guns and getting tib guns any time soon.

[MoeMag]

[Beemer]

the largest diameter is not the fins.

Well I think you are wrong on that. I could be wrong to[wont be the first or last] but if I am I will admit it. Hmmm side bet for a Beer???

Ha ha ya I wont be selling my XMag anytime soon either. You just arent thinking outside the box but thats ok some of us are.

[cockerpunk]

Well I think you are wrong on that. I could be wrong to[wont be the first or last] but if I am I will admit it. Hmmm side bet for a Beer???

Ha ha ya I wont be selling my XMag anytime soon either. You just arent thinking outside the box but thats ok some of us are.

no, im just not optimistic about there chances. paintball is a fickle business.

if you have a nice local micro brew thats good - ill take one! sry about the focus ...

fins -



widest part at the junction with the fins -

[Beemer]

Say yo baby baby yo.

The back half of the round does flex. The whole round itself is like a potato chip. to much flex or stress and BAM it cracks or breaks.

A special rifled barrel would spin it up down the barrel. I think that would only help the already outstanding accuracy and not the already 200 foot range. Purty soon I will have to sign a NDF.

[hitech]

I too am worried about this actually making it. It is such a big change and way to many people in paintball will not accept a big change no matter what. This is going to be a big threat to all the other paintball manufactures. I won't be surprised if they launch a hype campaign against these. And we all know how easy it is to get the average paintballer to buy into hype that supports their way of playing.

That said, when I can afford it, I'm planning on making the change. If the accuracy holds up I could easily play with just these. It's what I imagined paintball was before I played my first game. It only twenty some odd years for it to come true!

[Beemer]

no, im just not optimistic about there chances. paintball is a fickle business.

if you have a nice local micro brew thats good - ill take one! sry about the focus ...

No my mic still comes up different then yours. I will talk direct with PCP tomorrow before I conceed. I could post pics of my reading but am to slow right now. Good job on yours.

edit......move the mic right out to the tail end and read.

[cockerpunk]

No my mic still comes up different then yours. I will talk direct with PCP tomorrow before I conceed. I could post pics of my reading but am to slow right now. Good job on yours.

i have a mic too, want pics of that?

i get the same numbers with it too.

[Beemer]

i have a mic too, want pics of that?

i get the same numbers with it too.

see my edit in my post........move the mic right out to the tail...........