X-VALVE SPEED TEST = AVERAGE 32.7 CPS! (pic and sound)

[mark_426]

warp feed rate?

I remember reading that AGD said a warp with enough power could feed 40 bps? Im not entirely sure that it was agd... I have read a lot on warpig and some other sites... -Mark

[AlabamaMan]

BlackVCG is running his warp off of his morlock board. It's set to feed somewhere around 23 bps i think. (i know in can dump a halo in about 7.5 seconds)

[Evil Bob]

Alabama, get yourself a guitar finger exerciser from your local music shop ($7-$10) and spend some time working on it when you're idling watching TV or whatnot. Once you get used to the rythm and coordination, you'll be able to walk without the goofy hand position.

-Evil Bob

[space_weazel_45]

Weeeeeeee!

well i went back an looked over my valve diagrams and came up with my own solution playing with pressure, my lvl 10, and some other stuff and got my mag to shoot reasonably in a "full auto mode" about 15-20 bps my x-board revy was able to keep up and it was kinda fun but its still kinda gimmicky, agin this was fun but i dont tink i would ever play with it this way.

thanks everyone for getting the gerbil wheel spinin
truly awesome

[CoFFeY[NiTrO]]

You can tell me JaC. I need to go show off my Xmag with looks & speed

[SIGSays]

i think you are saying i know something you don't know.. nah nah nah nahaahhhhh... j/k


maybe you told him you won't say but you didn't tell him you won't draw up picture explinations and explain it in words...

[FalconGuy016]

The first time I took apart my valve (clueless about mags pretty much) my on/off fell off onto my floor. I quickly put it back in and gassed it back up, only to discover that the mag went into full auto and sounded a bit weird. I later found out that an oring was missing and I put the on/off in backwards

[SIGSays]

secret revealed! lol.. but i bet the trigger didn;t work

[cockermongol]

tippmann

check this tippmann out - it easily fired that fast without even an agitated loader

http://www.geocities.com/cockermongol/tippmann.avi

if it doesn't work u have to wait a few hours, i don't have much bandwidth

(if someone will supply webspace for me that would be nice)

[Catch22]

Well you've proven that the automag rules!!

But does it really matter because you'll

1) Never Be able to do this at almost any field
and
2) Can't physically do this with a properly setup mag.

Not tryin to flame but is the only point of this to prove that the air valve rules?

[mark_426]

wow the x rocks. J&C can you do it with a rt or is it some x only mod?

some get the tippmann vid up.. i wanna see it

heres an a5 vid i found.. it doesnt compare the the mags (go figure)

[cockermongol]

can anyone host the video?

[RRfireblade]

Originally posted by mark_426
wow the x rocks. J&C can you do it with a rt or is it some x only mod?

some get the tippmann vid up.. i wanna see it

heres an a5 vid i found.. it doesnt compare the the mags (go figure)

FYI,That one's ~13bps on the auto part.

Jay

[cphilip]

Originally posted by Catch22
Well you've proven that the automag rules!!

But does it really matter because you'll

1) Never Be able to do this at almost any field
and
2) Can't physically do this with a properly setup mag.

Not tryin to flame but is the only point of this to prove that the air valve rules?

It matters only because every other marker manufacturer CLAIMS to be faster to sell their markers wether they can shoot balls that fast or not. And most of them never prove it. It matters cause it sells Markers. Rightly or wrongly.

[SomebodySomeoneRTPcf]

How did you do that full auto thingy. The cps. I can only sweet spot with my rtp.