Agg Mag (mQ-Valve)

[Chronobreak]

that mean the valve can be annod ?

[B.A.M.]

sweet mag, love the barrel color

[spasticsquirrel]

im going to see tommarow what kind of cnc machine the school is getting, because i like 90 frames alot, but ill get an intelliframe if nothing can work out..

[matt-o]

hey if you guys are completely remaking the valve will you do me a favor and clean up or re position the macro fitting on the valve? thats the one thing ive always hated about mags, other than that its all pure gold

[shatter_storm]

Absolutely.

One of the ideas I had was to implement it on a non-paintball project involving an r/c scale model of a tank that will use the valve to fire munitions from the canon. Works well in the conceived application.....at least on paper. Hopefully I'll find the time to actually do it.

This is the reason why the mQ-Valve will be more tolerant of poor tolerances between the body and the rail since you don't have to worry about the linkages between the sear/bolt/on-off/trigger.

This but one of the numerous advantages of the mQ.

I was thinking something like arm mounted cannons using warp bodies, q-loader sockets, remote air, and some fancy strapping. Fully automatic, designed for scenario play as a terminator, the borg, etc etc. Good to hear there's that sort of flexibility, maybe I'll end up buying a valve once it comes out just to mess around with.

[PBX Ronin 23]

that mean the valve can be annod ?

It can definitely be annoed.

I was thinking something like arm mounted cannons using warp bodies, q-loader sockets, remote air, and some fancy strapping. Fully automatic, designed for scenario play as a terminator, the borg, etc etc. Good to hear there's that sort of flexibility, maybe I'll end up buying a valve once it comes out just to mess around with.

I see no reason that it can't be done. The only thing that you would really have to do is give it a body.

[ubooze]

Now since no one has asked anything for a while, I'll come in and ask.

Would it be possible to use this mod with warp left or right bodies?

And should this become a drop-in mod, how would the user go about getting the eyes installed on current bodies (ie: would they send them in, certified machinists, or something else?)?

[Chronobreak]

Now since no one has asked anything for a while, I'll come in and ask.

Would it be possible to use this mod with warp left or right bodies?

And should this become a drop-in mod, how would the user go about getting the eyes installed on current bodies (ie: would they send them in, certified machinists, or something else?)?

presumably if it takes a vert ule in this forum if it stayed this way it would easily take warp bodies

as for eyes probly pbx may offer a service but it might be timely and seomwhat $

any news? i figd with the recent pneu trigger info maybe we have some sooner hope here besides i think this mod has slightly mroe potential

[PBX Ronin 23]

We're weighing all our options. Perhaps Zup will make a run of ULE bodies with eyes pre-drilled.

[vf-xx]

I was thinking something like arm mounted cannons using warp bodies, q-loader sockets, remote air, and some fancy strapping. Fully automatic, designed for scenario play as a terminator, the borg, etc etc. Good to hear there's that sort of flexibility, maybe I'll end up buying a valve once it comes out just to mess around with.

Does everybody have that idea? I've been kicking that one around for years, just haven't done it cause I didn't have the time resources.

You MUST show it if you build it!!!!!!

[nicad]

We're weighing all our options. Perhaps Zup will make a run of ULE bodies with eyes pre-drilled.

If not, I might be able to run some ULE's through the mill to spot some eye holes/mounts.
Then again.. im sure yall could too.

lemee know.
part of my terms are I want to see an mQ-valve tho.

out!

[PBX Ronin 23]

We would prefer using a beam break eyes. Nicad if you want to do some, the hole position is smack center of the feed next to the ball detent. My only thing is that we need to come up with an aluminum cover.

If you're interested in doing something, let me know. This is the Cocker version so it should give you some idea.http://www.pbnation.com/showthread.p...&pagenumber=47

[Chronobreak]

talk guys if you havent

i would like to see a nice custom agg mag with a milled m-q-valve...maybe matching bodies...

did i hear read soemwhere you dont need the whole valve? how much is millable and or not needed? could this stil be made smaller/lighter?

btw im asking because my like dream gun would be a micromag with a mod like this warped

and i was itnerested because didnt nicad just mill a micro and mill a valve w/out reg for it(i looked for the thread but couldnt find it anywhere)

anyways just seems liek theirs some cool posibilities here
remember talks are good guys spread the p-ball love

[Mad_Man]

I Dont know if anyone has seen it yet. This is the MQ valve, atleast as it was shown on Air-Powered Forums.

["Joe"]

Karta MQ