Introducing the Micromag 2009

[Dend78]

they look a bit on the long side to me but i cant compare them to anything seeing as the pic is extremely close up, aren't the holes countersunk though?

[TheePsycho]

The breech detent holes are countersunk and there is a grove in the body for the detent to fit into.

I think I will just purchase them since they are the cheapest Angel detents I can find and if they don't work in warp mode I guess I will just be using one detent.

[Daze]

Guys, you don't need/can't use Angel detents. They have to be AUTOCOCKER detents.

[TheePsycho]

Guys, you don't need/can't use Angel detents. They have to be AUTOCOCKER detents.

Yeah I just realized that thinking that I bought a angel feedneck. I have a cold right now so I'm not thinking a 100% straight.

[Tracy_ptp]

The threading size on the detent hole is 3/8 24 standard cocker size.

I could throw in the shortend sear pin. I am still working on this.

[WarHamster]

Autococker and Angel detents are the same thing, at least they were in that era. ULE bodies take 'cocker detents, as do Angel LED, LCD, IR3 and more.

They're unfortunately not the same thing. My collection pretty much consists of nothing but cockers and mags and their detents are most definitely not swappable...

The stock AGD detents are cheaper than any cocker threaded ones I can find anywhere.

Looks like the CP detents will stick out too far and they are the cheapest at $12.00 each.
So $20.00 each for the Check It detents or $25.00 each for the Kila.

While I don't agree with the change there are other detent options. You wouldn't want to use CP detents anyways, they're poorly made and I've probably blown out nearly a half dozen of them over the years (the detent fails and the ball comes out into the breech and ends up getting fired out).

Palmer makes a good low profile detent with a delrin ball in brass for $12 or nickle for $17. I've had a set of the nickle ones for probably 5 years without any issues.

http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=54_58&products_id=272

The Stock WGP detents are also quite good and underrated. They have a steel ball which might actually be better given a mag's metal bolt and you can still find them in assorted finishes scattered around the internet for pretty cheap. E-Paintball has them for $6 in chrome.

http://www.e-paintball.com/wgp-autococker-chrome-ball-detent.html

Both of those detents are some of the lowest profile available and if they don't fit, I doubt anything WILL.

[Thelar]

I am ok with no detents, but throwing in the shortend sear pin sounds nice.

[Dend78]

i to am fine with no detents


also what about the check-it style detents? never used em but i think those may be low pro enough

[4rpp]

I am not o.k. with this we payed for detents and we should get detents. We have already waited alot longer than expected for these to be finished now we have locate and pay for a set of detents. Sorry you went over budget for the project but it does not change what we paid for almost 2 years ago

i agree, thats going to be another 60 bucks once shipping and boader charges. lol

[Tracy_ptp]

Ok heres the deal. When we first started this project it was one detent and we were going to include it. Then to please, you, the customer we went with 2 detents. Which was fine when we had a good supply of a very basic detent knowing that a lot of you would probably want to upgrade them anyway. Now that source has gone out of business. So here's the deal... I will EITHER supply you with 2 basic detents or the shortened sear pin that we have made ($15 each) your choice!!

PS...If any of you that live out of the country would rather have the pin and buy their own detents, you can have it shipped to me and I will include it in your box (to save any extra shipping)

[mpsd]

I was hoping to get both of them on the price. Anyways, if the sear pin is just a regular RT one shortened, I'll go with the detents as I don't have any coker ones laying around.

[zondo]

Tracy, do you want us to post, PM, or email?

[luke]

Whats the scoop on sear pins? I must have missed that info..

[Tracy_ptp]

Tracy, do you want us to post, PM, or email?

Email would probably be best because then I can save them. I only get so much PM space here!! [email protected] thanks guys!!

[alkafluence]

Post 2540 in this thread indicates that the sear axle pin was supposed to be included as well.

http://www.automags.org/forums/showpost.php?p=2714195&postcount=2540

Sear axle pin is a shortened version of the RT style that we will provide. The body is a little narrower than a Mag rail, but the concept is that you can simply mod a standard sear axle pin if you have to.