This is why you don't race morons for money, you can usually get a good idea who is good for and and who isn't, and if there good for it most likely your going to loose :)
Z06 Weeenie!
Collapse
X
-
i cant believe this thread is still alive
Soooo bar rooooooooooooooooooooooo~!
honestly do the *NO CUSSING*cares racers ahem ricers always like to post these things to show the world ' imports ' rule well buddy 11 sec 12sec daily driven hondas are very common now. sorry had to put in my 2 cents bebuleebeebebeb Come on everybody say it bebuleebeebebe EVERYBODY WAS KUNG FU FIGHTING!
Last edited by Load SM5; 04-19-2004, 06:51 AM.Comment
-
Originally posted by PyRoForget the nitrous, and spend the money on a bigger cam, and a nice set of heads. You will probably see about the same gain.
And why in the hell would you do headers and keep the cat and stock exhaust?
Those mods will actually make the car slower, unless chip tuning is done as well.
Bigger cam means less streetable. A nice split duration nitrous cam will give you about 190 horse on a 150 shot. The torque increse will be well over 200 lb/ft.
For the exhaust an aftermarket Y pipe will work fine bolted up the stock exhaust. That's why they make cutouts, unbolt and you're good.
Those mods will not make a car slower at all, even untuned. It just will not be that fast. But if you notice it says LS1Edit in the list of mods. That is the only way to correctly tune an LS1's PCM. You can not replace a chip in them. It's either that or a Predator flash tuner.Comment
-
Bigger cams mean less streetable to a certain extent, you can get away with bigger than stock.Originally posted by obsolete898Bigger cam means less streetable. A nice split duration nitrous cam will give you about 190 horse on a 150 shot. The torque increse will be well over 200 lb/ft.
For the exhaust an aftermarket Y pipe will work fine bolted up the stock exhaust. That's why they make cutouts, unbolt and you're good.
Those mods will not make a car slower at all, even untuned. It just will not be that fast. But if you notice it says LS1Edit in the list of mods. That is the only way to correctly tune an LS1's PCM. You can not replace a chip in them. It's either that or a Predator flash tuner.
Do a full exhaust, headers back don't cheap out on that.
You do heads and a cam on a car, and there is a good chance it will slow it down untill tuning is done.
Comment
-
ok ok
Im talking a Mustang Boss 302
2 4 barrel holleys
hurst shifter
headers
2.5 inch piping
american racing rims with some slicks
Now thats a fast car
Thats what I'm talking about.Dub V
Where greatness is learned
and couches are burnedComment
Comment