Deadlywind hAir trigger demo video

[magnj]

mmmmm...but did I hear 380?

[sitting_duck]

380 is what someone spent for a worrblade. he mentioned that he wouldn't mind spending that much again for an equivilant 'mag upgrade. i, for one, agree with him.

[AGDlover]

ok since i dont have a **** load of money can i have my intelliframe sent out to you to have it worked on??? thats when it becomes avaible

[Off Center]

I'm terribly impressed by this trigger. I do, however, have a question that I haven't seen anyone else ask yet: what about longetivity? How many cycles are expected from this frame? I ask because it seems like when you're riding a line this fine (2 oz. 0.01 in.) there's a lot of potential to get thrown out of tolerance. Along those same lines, if there are tolerance issues, how easy will adjustments be?

[Psychedelic]

I have got to say, I started with a mag years ago. Dabbled in the electros for a while and after seeing the 90 degree frames come out for mags, and ULT's, LVL10's etc. I finally decided to go back to a mag. So I traded my timmy for a Mag. Then I saw this. This definately ranks high up on the upgrade list.

But I have to say, if I can't get this in a 90 degree frame, I'll stick with a ULT. Whether it be buying a rogue frame with this installed, or sending in frames to be installed, or creating a drop in mod which people could do on their own.

Also this will definately sell. But make sure you don't go solely by what you hear on these forums. As stated before, there are a very high amount of high level players in this forum, and that is not AGD's biggest market right now. Perhaps this would allow them to expand into that market. But a lot of AGD's fanbase won't pay incredible amounts of money for this product.

[Butterfingers]

Cledford... if the design is what I think it is (using a 3 way and a ram) the gun fires in "cocker" mode that means it wont release the sear until you let go of the trigger making chronographing possible.

[warpedside671]

whooo weee this is sticky.Fisrt of let just say Nicad your work rocks,your mod will be one to be rekond with.Thier
electros maybe flashy and all but your kung fu is still better...lol

This mod will take paintball by storm put me on the waiting list "when one does start".

[Brophog]

Originally posted by Butterfingers
Cledford... if the design is what I think it is (using a 3 way and a ram) the gun fires in "cocker" mode that means it wont release the sear until you let go of the trigger making chronographing possible.

I think your right. It seems to me to be very similiar to a pneumatic assist pump, except for your using the assist to fire the marker, rather than cock it.

Same exact setup though, just a little smaller.

[magnj]

Ok read all freakin 13 pages lol. Looks very very promising.
XValve + ULT+ Nicad frame would be shawet

however I would realy not want to spend more 250 on this and i know irts gonna be more

BTW Nicad...You said no reactivity, would that be a possibility with tweaking or nay?

[GreasyPigeon]

ok

ok i got one quick question..i am not sure if this has been answered, and i am too lazy to read threw 13 pages of stuff. i know the hair trigger is a new trigger frame type deal, my qusetion is that do you have to do any thing to the on/off valve, does it matter is you have a single o-ring rt valve or the double o-ring rt valve like with the Ult

[Chronobreak]

so is agd testing this we all know how good agd research is they can test it out work out any kinks etc

[nicad]

The prototype hAir trigger was mounted to a stock X valve with stock on/off.. so far nothing needs to be replaced above the triggerframe.

AGD is looking into the technology used in this to decide if they want to do anything with it or not. If they do, it could be a product offered by AGD. If not, Deadlywind will either work on offering it on our own or in conjunction with another major paintball company.

out!

ps- guys please discuss OT triggerframe angle prefrences elsewhere or in private.

[APowers365]

It's personal preference people. I had a y-frame, sure it was better for my wrist, but I didn't like the feel for it and couldn't aim as well. I liked the intelliframe better. That's my preference.

Please stop this, this is not the place for it. Discuss it elsewhere.

[fire1811]

why dont you guys start a thread somewhere else

[Cryer]

Already on it:o

http://www.automags.org/forums/showthread.php?s=&threadid=131351