PTP Micromag Design Concepts

[luke]

I know that i may not be the most popular,

Well we have about 100 people (or at least 100 bodies sold) currently signed up for it.

[Lomarandil]

would your option 1 be a new breech, or just an elbow on top of the Center feed...

Because if it's just the elbow..
Something like the spyder (or Ion) mod kits from Qloader would do the same thing.

http://www.qloader.com/spykit.html

Although I do like your idea of a pf module sliding into the cf module.. if it can be made tight enough (not a lot of added height), I think that could work.

Lo

[muddshutter]

That 90 degree elbow is perfect for those that want a Q-loader or Warp feeder. One problem is SOLVED

The PF mod could be made to fit and would be plenty strong. Someone with the right tools, just needs to make one?

GREAT WORK

would your option 1 be a new breech, or just an elbow on top of the Center feed...

Because if it's just the elbow..
Something like the spyder (or Ion) mod kits from Qloader would do the same thing.

http://www.qloader.com/spykit.html

Although I do like your idea of a pf module sliding into the cf module.. if it can be made tight enough (not a lot of added height), I think that could work.

Lo

[going_home]

That 90 degree elbow is perfect for those that want a Q-loader or Warp feeder. One problem is SOLVED

The PF mod could be made to fit and would be plenty strong. Someone with the right tools, just needs to make one?

GREAT WORK

The centerfeed Micro that I have came with a warpfeed adapter.
Just unscrew the feedneck and screw on the adapter.
Someone could mod the adapter to go left or right.
It would be a little long probably, about like the standard feed mags were when they came out.
The new bodies should come with the adapter like the last ones did.

And maybe those that want right or left feed could send the warpfeed adapter to Luke to mod them ? Maybe ?

He would probably have to have one of the bodies also to see where it tightens down to
so he would know where to cut it to make the turn.

Or maybe even PTP could turn the warp adapter into a right or left feed ?

I honestly think the amount of people that want a right or left feed will be very minimal,
maybe 10 out of the 100, if that, but it would be an option for those that want to use it for warps or Q's also.

[Ruler_Mark]

really like this 1

[Dend78]

for those looking for the TAC style here is an idea

[secretweaponevan]

To be honest, I would want it to have the same dimensions and overall lines of the previous micromags. Just with dual angel detentes and an angel-threaded feedneck.

[LoveMyMagMoreThanYou]

One more thought........

For those that want the military look, why can't the design have some modular-ness to it? I went on to this web page and found some mil-rails

http://www.rockstartactical.com/index.asp

Why can't we place some dimples in the surface of the new Micro body that would match up to a standard mil rail. Then the end user could have the dimples tapped and drilled for that application. Those that do not want it, just get dimples?

Just another bone headed idea for the masses??????

Comments are helpful, please.......

My thought on this was close to the above idea. Couldn't the body be milled for attaching a picatinny rail and include a cover for those that don't want the rail?

[Fantom]

Check out this setup:




This body has an Autococker threaded barrel, an Autococker detent and came with a removable powerfeed.

I removed the powerfeed neck and made a RH feed in fiberglass/epoxy. This setup also allows you to have/make a horizontal feed just like a warp feed or a vertical feed like the speedballers like so much.

The common factor to this arrangement is that it allows to have a sighting device, in this case a red dot, on the centerline of the marker and as close as possible to the axis of the barrel.

[p8ntbal4me]

To be honest, I would want it to have the same dimensions and overall lines of the previous micromags. Just with dual angel detentes and an angel-threaded feedneck.

I second that idea on the dual angel detents.

I removed my stock PTP one and fitted the WDP ones on the side,.... works ALOT better on brittle paint.

[p8ntbal4me]

Would love to see a vert feed. Thats threaded and removable.

Also,.. the rail (if any) would not come right up to the feed neck so that you have room to put a low rise on if you wanted.

If it looks cool,... I'll buy one.

I dont care about how many ounces less it weighs. If thats some huge factor,... I'll go back to the gym more often and become less of a sissy.

Much rather have a good looking gun than something that looks like a piece of tube with a neck on it (ULE bodies)

[luke]

Please not another Tack one body.. I'm out if a senerio style body is made.

[LoveMyMagMoreThanYou]

Please not another Tack one body.. I'm out if a senerio style body is made.

Unfortunately there aren't a lot of speedballers using 'Mags these days and the woodsballers, like me, have taken over the 'Mag mantle. It would sell better with scenario styling than it would with speedball styling. IMHO that is.............

[Papa_Smurf]

Please not another Tack one body.. I'm out if a senerio style body is made.

This also applies to me.

[Dend78]

yeah im not to crazy about a tac body either but there were ppl interested in one so i drew it up

im trying to do up some requests so we have more things to look at, so if anyone else would like to see an idea slapped up there shoot it to me ill probably do another one tomorrow.