Finished my Pnuematic Trigger Frame...

[bigredbullseye]

Yes that would be cool especially the mounting to the intelliswitchbraket.

that would make the system interchangeable between stock and Pneumatic

super easy like!! good job

"I'd buy that for a dollar!!"(or 2.50) :rofl:

["the FitZ"]

I just thought of something when looking at Big's sled setup. Instead of clean cutting the end off the mpa-3 why don't we (and by we I mean you) cut just a notch out of it to guide the sear? BTW good clean setup.

[txaggie08]

does someone have an extra plug(i dont remember the clippard part #). If youve got one or two ill pp some money . i forgot to order when i did and its gonna cost me almost 13 dollars in S&H to get one here. thanks if you can help. or if somebodys ordering from them ill get you some money so i can get you to order them

[Big'n slo]

I just thought of something when looking at Big's sled setup. Instead of clean cutting the end off the mpa-3 why don't we (and by we I mean you) cut just a notch out of it to guide the sear? BTW good clean setup.

Thats what I did

And txaggie08, PM me your address

[SocialD]

I feel like I'm late to the party. I have had some great ideas to add when I first started reading this thread. However, I realized by the time that I finished reading the thread that all of my great ideas have all been posted by other people.

Nice work to everyone.

I can't wait to start mine.

I think that I'm going to do mine to one of my classic RT's. First, I'm going to have to get my hands on an intelliframe, or I might mod my y-frame to work with my classic and stuff all of the stuff into it.

[Bossman]

Well folks, I'm down in Florida for a vacation and I'll be putting my pneumo-mag through it's paces on sat. at a field close to Orlando. I'll let everyone know how it goes.

[freakfactoryimp]

hey i was thinking about doing this. i have a few Q from the ppl that made them. has anyone made them like nicad did all inside the frame and as easily walkable. if anyone has i am willing to pay someone to do it for me. this is one of the reasons i bought a mag.

thanks

[phishphen]

hey i was thinking about doing this. i have a few Q from the ppl that made them. has anyone made them like nicad did all inside the frame and as easily walkable. if anyone has i am willing to pay someone to do it for me. this is one of the reasons i bought a mag.

thanks

RRFireblade has one comin out that i think is similar to NICAD's....but WHEN it's comin out i dont know.....this mod is similar to those.... very light and short trigger pull, and you can RIP on it....

personally, i don't mind havin the LPR outside the frame. Read this thread in its entirety. You never know, you might have a puenmatic trigger before you can buy'em

[freakfactoryimp]

i read it all its just i had a cocker and was not to good with that so i would rather have some1 else that knows how to deal with Pnuematics and stuff to get it right. i think i may just wait it out. i wish nicad would release like some plans or something on how he made his . its not like he can make them or w/e, correct

[phishphen]

i read it all its just i had a cocker and was not to good with that so i would rather have some1 else that knows how to deal with Pnuematics and stuff to get it right. i think i may just wait it out. i wish nicad would release like some plans or something on how he made his . its not like he can make them or w/e, correct

theres no timing issues with this mod. i know what your talking about when it comes to cockers. my friend had one and we spent all night trying to time it, and still couldn't.....

waiting it out is cool too, you know your limitations.....

[freakfactoryimp]

hey phishphen would the orracle tickler be smaller than the micro rock. also teh macdev reg is pretty small to. i think it may be samller than all 3. just a thought so where you could put it in the frame.

man i really wish nicad could like release the parts he used or something. he couldnt get in trouble for that could he?

[Big'n slo]

Anyone have some spare tubing?

I've been trying for the past week to get to a local store but work has been killing me.
Todays my 6th 13hr day and I've got to work this weekend too

Haven't even tested my setup yet..


Ok, enough with the sob stories.

If anyone knows a place I can order from online, that'll do too.

["the FitZ"]

Let me be the 1st to post a problem. My gun is slow.

the pneumatics wont recharge fast at all. The gun keeps up and I'm pretty sure it's not the ram. Even w/ the body off it does it, so I know it's not a pinched hose. Any ideas? The ram stays back for a long time and, if I remember correctly, it leaks?

-Edit. I believe this happened when I was taking internal pics to send to duckhunt for the site. So when you think about it, It's kinda your fault and you should feel obligated to help me

[Duck Hunt]

freakfactoryimp - A Tickler is DEFINITLY smaller than the micro rock...BUT, we're using the Micro Rock because it can handle 800+ PSI. I'm not too sure about the Tickler Reg but since the Automag requires no secondary regulator then you need to hook the LPR up to your air source.

And it wouldn't matter if Nicad released parts numbers...you can't buy those parts from Clippard or anyone else. Nicad and RRFireblade both use specially machine parts to make it work.

Big'n Slo - How much hose you need? I'm away for the weekend but if you haven't got it by then I can send you a good length along with that MSV valve, just lemme know!



FitZ - Sorry I haven't uploaded your pictures yet! they came out REALLY blurry though...you might want to take them again From what I can tell you mounted your parts just like Phishphen did, so he might be the one to ask about that. You could need to raise your operating pressure, it'll make the pull alittle harder but it might help. I don't have much experience with the MPA but maybe you need a QEV or a better plunger.

Keep up the good work guys!! Things have been really busy around here and I haven't gotten a chance to start my project yet BUT, hopefully before next weekend I'll have it done........








And I plan on record video tutorials! Wish me luck!

Sean

[noahyay]

luck