Finished my Pnuematic Trigger Frame...

[Jack & Coke]

...I'd rather have it by the valve but the store didn't have any t-fittings...

f.y.i.

If you really want a T-fitting, try here:

Palmer's Pursuit Shop
3951 Development Dr. #3
Sacramento, CA. 95838
Ph. (916) 923-9676
Fax (916) 923-9674

http://www.palmer-pursuit.com/catalog/fittings.htm

1/8 NPT Street T

Price: $4.50

Plating Option: Brass or Nickle (add $2)

[phishphen]

no no when he had the 3way lower was the spring out then? And by how much did lowering the 3 way shorten the throw of the trigger?
...
O and phish what did u use as a plunger in the mpa-3 is that just a piece of still. What size is it do u know?
Thanks guys

yea, the spring was out when he lowered the SMAV-3 but how much shorter the pull was i do not know....in my setup, the pull i have now is just a TIIINNNYYY bit over 1mm.
the plunger in the MPA-3 is made of a RIVNUT and flush head screw, but from what i've heard from Bossman, 1/4 rod will work.....

[phishphen]

Up^

added more internal pics to the 1st posting.......


UP^

["the FitZ"]

So can I screw into the plastic that's in the mpa-3?

And the reason I ask about 3-way placement is for the issue of space which right now is my main problem. Getting my lines to route around the ram is the biggest problem.

Thanks

[Duck Hunt]

UPDATE - I wanted to push this back up too the top...for awhile there it was hanging at the front of the line

I just ordered my last part from Parker, a Low Profile Cartridge cylinder (P1G). It was 20 bucks even through the Parker dealer next to me. As soon as I get it (about a week) I'll start working on mine, and will produce a STEP BY STEP guide to it




Anyone else have something to update on their mods????

Sean "Duck Hunt"

[email protected]

["Joe"]

Definitley looking forward to the step by step.

If I find the time, I could have mine done by the time my local field opens

[phishphen]

...

one thing i always kept saying to myself when doing this mod was "take it one step at a time. tackle the roadblocks as they present themselves. don't worry about things like rigging the lines when you haven't even made the actuator yet."
as for my project, i have the pneumatic trigger working so now it's on to the next step:

Integrate the LPR into the grip.....doing so will defintely clean up the mod....

when i get another trigger frame, i will post progress and instructions like Duck Hunt.......

[Bossman]

I just called the company that I ordered the MSV-1's from. They told me that they haven't even sent out my order yet! So I've been in dry dock waiting for my new valve.

I did go out to my local field and aired up my prototype mag, shoots dry as fast as you could ever hope.....put some paint in a HALO with old batteries and a level 7 bolt......paint blender city.

[UTDragun]

will produce a STEP BY STEP guide to it

'bout time foo

j/k thank you

[Wassupstranger67]

Im going to playing saterday with my pnuematic mag. Ill let you guys know how it goes!!!

["the FitZ"]

UPDATE: I just (like 1 min ago) got a 1/8 socket to take out the exhaust port

okay next question. About where can I tap a nipple into the mpa-3? is it right around the letterind of it? sorry for the immaturity but I'm a teenager and things like this amuse me.

[phishphen]

UPDATE: I just (like 1 min ago) got a 1/8 socket to take out the exhaust port

okay next question. About where can I tap a nipple into the mpa-3? is it right around the letterind of it? sorry for the immaturity but I'm a teenager and things like this amuse me.

you can get an idea of where to tap by studying the picture BOSSMAN posted in this thread. Refer to post #198....sorry for the lack of detail, but a picture is worth a thousand words ...good luck.....

[Big'n slo]

Well, just got a big ol box from Clippard and McMaster Carr.
Time to charge up the camera

[Big'n slo]

I just realized I have no hose to connect all these cool little parts together.

Anyone suggest a place to get some?

[Gunga]

I just realized I have no hose to connect all these cool little parts together.

Anyone suggest a place to get some?

DOH!

Better make sure you have air while you're at it.