Finished my Pnuematic Trigger Frame...

[richie]

Cut Away (kinda)

HERE IS A LIL PIC i WHIPPED UP ON THE PAINT PROGRAM

[Duck Hunt]

Awesome pic richie! That explains alot for everone who hasn't grasped how it works yet.

Well, its taken alittle bit but I guess now is a good time to lay it all on you guys...

http://www.paintball-workshop.info

CLICK IT!!

I'm working very slowly at getting as much as possible up there, if anyone here has modded anything and wants it up there emial me at the link on the page and I'll get it up when I can!

Let me know what you guys think.

Sean

[DGBaller]

Yeah that pic is really helpful. Thanks man.

["Joe"]

I'm waitin' for the step by step instructions

[Duck Hunt]

Joe, step by step instructions won't really help. It's all up to the person who's doing the mod. You might decide on one thing, someone might want to try something else.

The main thing to remember is, you have to choose your parts wisely, after than, choose where they can go and should go, then figure out how to fit them in your frame. Take your dremel to it and good luck!

Sean

["Joe"]

I'm so lazy though...

I'll probably get around to this about summertime....

[DGBaller]

What tools did you guys use for this mod?

[noahyay]

try reading the thread

it depends on everything
frame
parts used
style you set it up in

[the electrician]

That pic is right on the money!!!!! So much info in that one pic. MUCH THANKS!!!
for tapping the 3-56 barb, heres a TRICK:

use a 4-40 tap, i know its the wrong one, But, turn the tap 1 maybe max 2 turns into the hole and you'll find the barb threads right in. Red loctite it in and be sure not to over torque it cuz you could shear off the barb. It's a ghetto solution, but hey, it worked for me

yikes!

you know, M2.5- .45 is the metric equivalent to 3-56 thread. you might be able to find one of those at the local hardware store.

Jack and Coke- yep. I milled a slot inthe rail. looks just like a pump rod slot, just goes farther back. you wouldn't have to though you can also drill a hole off center through the ASA to route the hose back to the frame underneath the rail.

[Jack & Coke]

Well, its taken alittle bit but I guess now is a good time to lay it all on you guys...

http://www.paintball-workshop.info

CLICK IT!!

I'm working very slowly at getting as much as possible up there, if anyone here has modded anything and wants it up there emial me at the link on the page and I'll get it up when I can!


Let me know what you guys think.

Great site!

But, please change the colors... Black background and blue text is hard on the eyes.

[Jack & Coke]

...you wouldn't have to though you can also drill a hole off center through the ASA to route the hose back to the frame underneath the rail...

good tip

[phishphen]

...

DuckHunt: NICE job on the site, i'll link it to the first post.....UP^


E :
using a 4-40 + loctite is pretty ghetto
I'll look at da hardware store for the suggested tap......thanks......

[Wassupstranger67]

Wassupstranger: Saw that you were looking to put a MicroRock on a 15 Deg. ASA and then run hose into the rail; have you considered using an RT Classic Rail that already has milled air passages? You'd have to get rail bushing for the field strip screw, and find a way to block the air passage to the strip screw area (a dab of JB weld should do it, supported by the rail bushing) that used to go to the old banjo bolt.

Wanted to say thank you to you, the Electrician, Bossman, phishphen and all of you others out there who have spent the time in thinking, testing, getting you fingers pinched and assembling this concept. Now I have to convince my wife that I REALLY need all these parts and a new X-Valve . . .

Fritz1970

Awwwwwwwww man I all ready hacked up my rail.... lol ohh well. It was just my stock 68 rail. Is the only stock part left on the gun. I was going to go with a logic alpha rail later.

[Thordic]

Just bought a Pneumag off Magaman, figured I'd throw it up here. Still trying to get information on the ram, but he used a Palmer Quickswitch and just blocked off one port (which I plan on fixing to be a little less ghetto ).



Heres more pics, I don't feel like reposting them all:

http://www.thordic.com/forums/index.php?showtopic=1258

[Jack & Coke]

...Still trying to get information on the ram...

very cool! Thanks for sharing... that ram looks pretty cool. Please let us know how well it works